الجص الأسمنتي مابي الترا كولور بلاس بالترميز اللوني (150 Yellow-Alu Scatole) وزن (4X5Kg)

It uses high-quality resins and inorganic fillers for strong performance, is scratch and abrasion resistant, cures efficiently, and is suitable for a range of substrates. It’s designed to provide excellent color consistency and long-lasting results on both walls and floors, including applications requiring conductive flooring considerations.

It is formulated for joint widths up to 20 mm and can be used on typical wall and floor substrates such as ceramic tiles, porcelain, and natural stone, with proper substrate preparation and suitable conditions.

The product is packaged as 4 bags of 5 kg each, which helps with economical consumption and makes handling easier in tight spaces or narrow installations.

Pour the powder into clean water and mix until you achieve a smooth, lump-free paste. Let it slake for a few minutes, then remix briefly before use. Apply with a rubber float, press into joints, remove excess grout after initial setting, and wipe the surface clean for a uniform finish. Always follow the label directions for the exact mixing ratio and working time.

After grouting, allow the product to cure under typical environmental conditions. Clean any haze from the tile surface promptly with a damp sponge, and avoid heavy foot traffic until the grout has sufficiently set. For best results, follow the product’s guidance on cleaning and curing times based on ambient conditions.

Yes, it is intended for use on walls and floors where durability and resistance are important. For wet areas or exterior installations, ensure proper substrate preparation and follow the recommended usage conditions for outdoor or damp environments.

Wear appropriate protective gear such as gloves, eye protection, and a dust mask to avoid skin and eye contact or inhalation of powder. Work in a well-ventilated area, keep away from children, and wash hands after handling. Follow all safety data provided on the product label.

Estimate by calculating the total area (length × width) of your tiled surface and the intended joint width. Divide the area by the typical yield per kilogram for that joint width, then add a 10–15% waste allowance. Because yield varies with tile size, shape, and joint width, use this as a planning guide and adjust for your specific project.

Ultracolor Plus 150 Alu emphasizes high coverage, rapid workability, and durability for walls and floors, with a color-true finish. It’s part of Mapei’s advanced grout family and is contrasted with other lines like Keracolor S or Ultracolor Plus FA, which have different formulation focuses (e.g., specific flexibility, finish, or curing characteristics). You can explore alternatives on Fepy.com to compare specific features and results for your project.

Good alternatives on Fepy.com include Mapei Ultracolor Plus 150 White (available in various packaging) and Mapei Keracolor S, which offer similar cementitious bonding and color options with different performance focuses. For direct comparisons, you can view the product pages or search results at these example URLs: https://fepy.com/search?q=mapei+ultracolor+plus+150+white and https://fepy.com/search?q=mapei+keracolor+s