وحدة غسل العينين المحمولة ماتسودا (Matsuda) سعة (16Gallon) موديل (P100)

16-gallon capacity; gravity-fed; delivers 7+ gallons in 15 minutes; safety yellow polyethylene tank; handles on the top and side for easy transport; wide-fill opening with a threaded cap for inspection and filling.

Remote plant areas, low-traffic hazard zones, and other locations without sustained access to potable water where a portable eyewash is needed.

The unit has handles on the top and side for easy carrying, a bright safety-yellow tank for visibility, and a wide-fill opening with a threaded cap that facilitates inspection, cleaning, and refilling.

Open the wide-fill opening, remove the threaded cap, fill with potable water, reseal the cap, and inspect the unit for leaks or dirt. Regularly rinse and clean the interior and reseal before use to ensure readiness.

In an eyewash emergency, access the eyewash outlets and flush both eyes with clean water from the unit for at least 15 minutes, ensuring the unit remains on a level surface and readily accessible.

Eyewash stations are used to meet eyewash safety requirements; verify your local regulations and applicable standards (for example ANSI Z358.1) to ensure full compliance for your facility.

Manufacturing floors, mining sites, remote job sites, or any setting where hazard exposure exists but continuous water supply isn’t available.

The P100 offers a substantial 16-gallon capacity and gravity-fed flow that delivers 7+ gallons in 15 minutes, providing long-running eyewash capability in remote locations. Smaller units require more frequent refills, while larger units may be heavier.

Regularly check the wide-fill opening and threaded cap for cracks or wear, keep threads clean, and reseal securely after filling to prevent contamination.

Yes. The 16-gallon polyethylene tank is designed with handles on the top and side to facilitate transport, making it practical for mobile or remote work sites.

Replacement parts and compatible accessories are available on Fepy; check for nozzles, caps, and related components designed for the Matsuda P100 to keep the unit ready for use.