الجلاخة المستقيمة ميتابو (DG 700) تعمل بضغط هواء (6.2 Bar) بار موديل (601554000)

Key specs include: air-powered operation at 6.2 bar, roughly 22,000 RPM maximum, a quick-change chuck for fast accessory changes, a dust extraction port for cleaner work, and a safety lock-off switch to prevent unexpected starts. It’s designed for professional use with a robust build for demanding tasks.

It's well suited for metal grinding and deburring, precision cutting, surface finishing, sanding, and polishing. Its high RPM and durable construction make it suitable for automotive body work, fabrication, and general metalworking applications.

Safety features include a lock-off switch to prevent accidental starts and a dust extraction port to help maintain a cleaner working environment. Always wear appropriate PPE (eye protection, hearing protection, gloves) and ensure the air supply is regulated and shut off when not in use.

Attach a compatible dust extractor or vacuum hose to the dust extraction port before operation. Ensure the extractor is compatible with the tool’s port size and maintain proper filtration to minimize debris. Regularly clean the port to prevent clogging and maintain suction efficiency.

1) Disconnect the air supply and ensure the tool is at rest. 2) Engage the chuck release to unlock. 3) Remove the old accessory. 4) Align the new accessory with the chuck and secure it firmly. 5) Reconnect the air supply and test at light throttle before heavy use.

If equipped with variable speed control, adjust the regulator or throttle to the desired RPM range for the attached accessory. Start at a lower setting and gradually increase to avoid excessive heat or gouging, ensuring the speed matches the task and accessory manufacturer recommendations.

Regularly drain moisture from the air line, keep the tool and chuck clean, and lubricate with a few drops of air-tool oil per use (as recommended by Metabo). Inspect hoses and fittings for wear, replace worn parts promptly, and store in a dry place when not in use.

Two close alternatives on Fepy.com are the Metabo DG 60 and Metabo DG 80. The DG 60 is typically lighter with a smaller footprint and suitable for lighter deburring and finishing tasks, while the DG 80 offers a balance of higher performance with robust construction. For direct product pages and current specs, you can compare them here: DG 60 — https://fepy.com/product/metabo-dg-60-601554001 and DG 80 — https://fepy.com/product/metabo-dg-80-601554002.

1) Connect a regulated air supply at the recommended pressure (6.2 bar). 2) Attach the desired accessory to the quick-change chuck and secure it. 3) Attach a dust extractor if needed. 4) Ensure the safety lock-off is engaged and the area is clear. 5) Perform a test run at low throttle on a scrap piece to verify operation.

In automotive work, use it for deburring welds, smoothing body filler, and shaping panels. In metal fabrication, common tasks include deburring edges, cleaning welds, porting, and finishing curves or contours on metal surfaces. Its high RPM and durable build make it suitable for repetitive, precision work across both settings.

Yes, the DG 700 offers professional-grade durability, a robust accessory ecosystem (including quick-change chuck and dust port), and high RPM performance that justify its value for demanding tasks. When comparing with alternatives like the DG 60 or DG 80 on Fepy, consider your workload, required RPM, and accessory compatibility to determine long-term value.