مسدس الطلاء ميتابو (FSP 100) يعمل بضغط (3.5 Bar) بار موديل (601574000)

Key specs include voltage of 220–240V, operating air pressure around 3.5 bar, a lightweight design, an adjustable nozzle, a built‑in filter to reduce clogging, a safety lock to prevent accidental discharge, a quick‑release system for easy access, and variable speed control for precise application.

The gun is suitable for a range of coatings commonly used in automotive and industrial settings, including primers, lacquers, and paints. Start with manufacturer recommendations for thinners and viscosity to ensure a smooth spray and avoid runs.

Begin by connecting the gun to a suitable air supply and power source (230V). Attach your selected nozzle, adjust the spray pattern with the adjustable nozzle, and set the desired material flow with the trigger control (including the variable speed if provided). Use the safety lock when not actively spraying and engage the quick‑release for maintenance or nozzle changes.

After use, disconnect power and air, remove the nozzle, and clean the internal passages with the appropriate solvent for your coating. Rinse the built‑in filter and inspect the quick‑release components. Regularly check for nozzle wear and replace if the spray pattern becomes uneven.

It includes a safety lock to prevent accidental discharge, a built‑in filter to reduce clogging, and a robust construction designed for reliable operation. Always wear appropriate PPE (gloves, eye protection, and a suitable mask) and ensure proper ventilation when spraying.

If the spray pattern is inconsistent or clogging occurs, check the built‑in filter for debris, inspect the nozzle for wear or blockages, and ensure the coating’s viscosity is within recommended limits. For reduced flow, verify the air supply is stable at the correct pressure and that the trigger control is functioning properly.

The FSP 100 provides a balanced combination of 3.5 bar performance, adjustable nozzle for pattern control, built‑in filtration, and quick‑release access. For a direct comparison with other options on Fepy, you can review alternative models here: https://fepy.com/product/metabo-fsp-120-spray-gun-601574001 and https://fepy.com/product/metabo-fsp-110-spray-gun-601574005. These models offer different flow rates and pattern options to suit various coatings and project sizes.

It is well suited for automotive refinishing, furniture and cabinetry coatings, industrial coatings, and general pretty-much-anywhere spray work where a reliable, mid‑size spray gun with adjustable pattern is beneficial.

Start with the coating manufacturer’s viscosity and recommended nozzle size. Use the gun’s adjustable nozzle to refine the spray pattern and test on a sacrificial panel. If the coating runs or sags, reduce flow or adjust air pressure; if the spray is dry or splattery, increase flow or adjust nozzle size as appropriate.

Typically the package includes the spray gun, nozzle(s), a quick‑release component, and a basic setup for operation. Replacement parts such as nozzles and filters are usually available from Fepy’s catalog—check the product page for compatible accessories and ordering options.

Yes, you can review the return options available for this product on Fepy’s returns page or by contacting customer support to understand eligibility, timelines, and conditions for returns or exchanges.