جلاخة زاوية (صاروخ) من ميتابو موديل (Webpa 17-125)

Key specs include: 1750 W rated motor power, 125 mm disc diameter, maximum speed up to 10,500 RPM (no-load 8,500 RPM), spindle lock for easy disc changes, a tool-free adjustable guard, a rotating auxiliary handle (360-degree compatibility), and a die-cast aluminum gear housing for durability. It also features a safety brake and no-volt release switch for added operator protection.

It comes with a safety brake to stop the wheel quickly, a no-volt release switch to prevent unintended starts, a spindle lock for safe disc changes, a tool-free guard pivot for quick guard adjustments, and a robust ergonomic design with a rotating auxiliary handle to reduce fatigue and improve control. A secure guard helps protect you from wheel shavings and debris during use.

First, unplug the tool. Engage the spindle lock to prevent rotation, then use the appropriate spanner or tool provided to loosen the disc nut. Remove the old disc, place the new 125 mm disc onto the spindle, and tighten the nut securely. Reinstall the guard if it was removed and resume work with the tool unplugged during setup.

The guard is tool-free adjustable, allowing you to pivot it to the desired angle for your cut. Set the depth using the guard’s depth adjustment mechanism, ensuring the guard enclosure covers the wheel and the guard tab aligns with the mark for your chosen depth. Recheck alignment after any adjustment before powering on.

This model uses standard 125 mm discs with a typical 22.23 mm arbor bore. You can use grinding wheels, cut-off discs, and sanding discs designed for 125 mm grinders, as long as they are compatible with the wheel bore and the grinder’s speed rating. Always ensure the disc type matches the task (metal grinding, cutting, or finishing) and install a suitable guard for the operation.

Common use cases include heavy-duty metal grinding, weld cleaning, rust removal, deburring, and cutting of metal profiles or bars. Its high power and 125 mm disc size make it well-suited for professional fabrication work and workshop tasks where speed and control are important.

Always wear PPE such as safety glasses or a face shield, hearing protection, gloves, and a dust mask if needed. Check that the guard is properly installed and adjusted, secure the workpiece, maintain a firm two-handed grip, start at low contact, and keep hands away from the disc. Ensure the work area is clear of flammable materials and never use damaged discs. Disconnect the tool before any disc changes or adjustments.

For a quick comparison on Fepy, you can look at similar 125 mm models to balance power, weight, and control. Alternative options you might consider include: Metabo WEP 14-125 Quick (125 mm, slightly lighter, practical for general tasks) — https://fepy.com/en/products/metabo-wep-14-125-quick-angle-grinder and Metabo W 9-125 Quick (compact and lightweight for precise work) — https://fepy.com/en/products/metabo-w-9-125-quick-angle-grinder. These offer different ergonomics and weight profiles while staying within the Metabo 125 mm family.

Before first use, inspect the tool and guard for any damage, ensure you have the correct 125 mm disc mounted with the spindle lock engaged, and confirm the guard and handle are properly installed. Check that the switch is functioning and that the power source matches the tool’s requirements. Verify that the auxiliary handle is securely tightened in the desired position, and perform a low-speed test in a safe area with the grinder unplugged until you are ready to operate.

Yes, the Metabo WEP 17-125 combines a high-torque 1750 W motor, 125 mm disc compatibility, and multiple ergonomic and safety features in a robust die-cast housing. It is designed for professional use with long-term durability, which typically justifies its price through performance, control, and reliability. When evaluating value, compare it against other 125 mm grinders with similar features and consider the safety protections, comfort during extended use, and the ease of disc changes.