سخان المياه الكهربائي العمودي من ميلانو سعة (10L)

Key specs include a 10L tank capacity, vertical orientation for space efficiency, an energy‑efficient heating element, a corrosion‑resistant inner tank, built‑in overheat protection, and simple user controls for adjusting water temperature.

Compared to the Milano 140900200030 (8L, vertical) and AquaFlow 200300100010 (10L, vertical): the 8L model offers a smaller capacity and potentially lower heat output, while the AquaFlow unit provides a similar 10L capacity from a different brand. The Milano 140900200035 is designed for compact spaces with a vertical layout and built‑in safety features, whereas the horizontal variant (if available) may suit different wall configurations. See the models here: Milano 140900200030: https://fepy.com/product/milano-140900200030-electric-vertical-8l-compact-water-heater; AquaFlow 200300100010: https://fepy.com/product/aquaflow-200300100010-electric-vertical-10l-compact-water-heater.

Yes. Its compact vertical design and 10L capacity make it well suited for small living spaces such as apartments or compact bathrooms where space is at a premium.

General installation steps: select a suitable vertical wall location with clearances, mount the provided bracket, connect the cold water inlet and hot water outlet, wire the unit to a dedicated electrical circuit (as per local electrical codes), fill the tank and bleed any air, set the thermostat to the desired temperature, and test for leaks and proper operation. If you’re unsure about electrical work, consult a qualified electrician.

It includes built‑in overheat protection to prevent the unit from overheating and a corrosion‑resistant inner tank to enhance longevity. Ensure installation follows local electrical safety standards and avoid exposure to damp or wet environments unless the product is rated for such use.

The unit is designed for efficient heating with a well‑insulated 10L tank. To optimize energy use, keep the thermostat at a practical level, use hot water only as needed, and ensure the unit is installed in a location with minimal heat loss and proper insulation.

Regular maintenance includes periodic flushing to remove mineral buildup, checking fittings for leaks, and inspecting the thermostat and electrical connections. Follow the included manual for step‑by‑step guidance and safety precautions.

If you need to return the item, initiate the process through Fepy’s return channel, ensure the product is in its original packaging and unused condition, obtain an RMA, and follow the provided return instructions. The team will guide you through eligibility and any restocking considerations.

The unit typically requires a standard household electrical supply (commonly 230V AC in many regions) on a dedicated circuit. Always verify the voltage and current ratings on the product label and install per local electrical codes. Do not use extension cords or adapters for permanent installations.

This model is designed for typical domestic water pressures. If your supply is unusually high, consider using a pressure‑reducing valve. Check the product label for exact pressure ratings and consult a plumber if you’re unsure about compatibility with your system.

The package typically includes mounting hardware such as a suitable bracket and screws, along with an instruction manual. Always verify the contents on delivery and follow the included setup guidance for proper installation.