شريط القياس الرقمي (Milwaukee) نوع (M18) طول (30M) موديل (M18FPFT-202)

Key specs include a 30 m fish tape length, a non-conductive nylon jacket for corrosion resistance, a built-in M18 battery (6 Ah as listed in item bullets), a speed range of 0–45 RPM with CW/CCW direction, REDLINK overload protection, adjustable tension, an integrated LED light, and an ergonomic handle with on/off controls and a shoulder strap for transport.

The NC Set includes the 30 m NC fish tape, a built-in M18 battery (6 Ah), an integrated LED work light, an ergonomic handle with left/right motor direction switches, adjustable tape tension, and a built-in shoulder strap for easy transport.

Basic operation steps: 1) Ensure the M18 battery is fully charged and seated properly. 2) Power on the unit. 3) Choose the direction (CW or CCW) using the built-in switch. 4) Set the desired tension for your pull. 5) Feed the tape into the run while watching the LED light for visibility. 6) Pull steadily and avoid forcing the tape. 7) When finished, retract slowly and switch off.

The tape uses a steel core with a non-conductive nylon jacket, which provides superior corrosion resistance, reduces friction during winding and pulling, and helps protect wires as you navigate tight bends and hidden spaces.

Ideal for pulling wires through walls, ceilings, and conduit runs in residential or commercial electrical installations, especially where long runs, tight spaces, or multiple bends are involved. The built-in light and adjustable tension help you work in challenging environments more efficiently.

Maintenance tips: keep the unit and tape clean and dry, inspect the tape for kinks or frays and replace as needed, avoid sharp bends that exceed recommended radii, store in a dry place, and periodically check battery contacts. Use the LED light to inspect work areas and ensure smooth operation.

This tool uses Milwaukee M18 batteries. The NC Set includes a built-in M18 battery (6 Ah). It’s compatible with other M18 batteries and tools in the Milwaukee ecosystem, as long as the battery is properly seated and charged.

Powered fish tapes offer faster runs, reduced physical effort, and consistent tape payout with adjustable tension, which is helpful in long or complex runs. Manual tapes require more manual pull force and can be slower, but they’re simple and don’t require a power source.

Compared with manual fish tapes on Fepy, this powered Milwaukee model provides motorized winding, adjustable tension, and illumination for difficult spaces. For alternatives, you can explore other Milwaukee powered options and comparable torque-enabled tapes listed in the category. Example alternatives available on Fepy include: Milwaukee alternative model: https://fepy.com/product/milwaukee-m18fpft-201-m18-powered-fish-tape-30m-nc-set, and RIDGID/Stanley style options in the fish-tape category such as: https://fepy.com/product/ridgid-50ft-power-fish-tape and https://fepy.com/product/stanley-fatmax-power-fish-tape-50ft

Yes. It’s designed for indoor electrical wiring tasks in walls, ceilings, and similar indoor spaces. Avoid exposure to standing water and extremely wet environments to protect the electronics and battery.

For many residential and light commercial runs, 30 m is ample to reach most typical needs. For very long runs, you may need to feed incremental lengths or use the tool in stages, depending on the layout and number of bends.