Milwaukee SCS41-76 76mm Diamond Saw Blade Set, Tile & Masonry Blades - 5-Piece Pack

Key specs are: 76 mm diameter, 10 mm bore, 5 pieces per pack, ultra-thin kerf for minimal waste, and laser-welded diamond segments for strength and durability.

According to its listing, it’s designed for cutting a range of materials including wood, metal, and plastic, and it supports both dry and wet cutting depending on your tool and process.

It is suitable for circular saws, reciprocating saws, and jig saws that accept a 76 mm blade with a 10 mm arbor.

Unplug the tool, check that your arbor is 10 mm, remove the old blade, place this blade with the teeth oriented correctly, and securely tighten the mounting nut. Recheck alignment before use.

Use a proper feed rate, avoid forcing the blade, apply adequate cooling for wet cutting if needed, and allow the blade to cool during long cuts to prevent overheating.

Wear eye protection, gloves, and hearing protection. Secure the workpiece, keep hands away from the blade, inspect the blade for damage before use, and replace if any cracks or missing segments are found.

Yes. Buying the 5-piece pack often provides a lower cost per cut than purchasing single blades, making it a cost-effective option for frequent use.

If you’re exploring similar options, you can view other 76 mm diamond blades on Fepy to compare prices and features. For quick access, see: https://fepy.com/search?q=76mm%20diamond%20blade and https://fepy.com/search?q=milwaukee%20diamond%20blade

An ultra-thin kerf means less material is removed per pass, which typically results in smoother cuts, reduced waste, and faster cutting when used correctly.

Yes, as long as the tool accepts a 76 mm blade with a 10 mm bore and the tool’s guidelines allow diamond blades for the intended material and cutting task.

Store in a dry, protected case away from direct sunlight. Inspect for any damage before reuse, clean off debris after cutting, and keep teeth intact to maintain performance.