كماشة قطع طرفية صغيرة ساتا قياس (4") موديل (GL70616A)

They measure 4 inches in length, are made from chrome-nickel steel, feature induction-hardened jaws for wear resistance, laser-hardened cutting edges for long-lasting sharpness, a rust-resistant coating, and TPE two-tone anti-slip handles for comfort and grip.

End-cutting pliers have cutting edges aligned with the end of the jaw, allowing flush cuts right up to a surface. This makes them especially useful for trimming nails, pins, or wires flush with a base or workpiece.

The cutting edges are laser-hardened for sustained sharpness, and the jaws are induction-hardened, both contributing to better wear resistance and longer tool life in demanding tasks.

They’re well-suited for electrical work involving small wires, jewelry making, and craft projects where precise, close-to-surface cuts are needed.

Keep them clean and dry after use, wipe away debris, apply a light engine oil or lubricant to the pivot point, and store in a dry place to prevent rust and corrosion.

Wear eye protection, keep fingers away from the cutting area, avoid using them as prying tools, and only cut materials within the tool’s capacity. Use steady, controlled motions to prevent slips.

If you’re considering other sizes or slightly different jaws, you can compare these with similar options on Fepy such as SATA GL70614A Mini End Cutting Pliers (3-1/2") and SATA GL70618A Mini End Cutting Pliers (4-1/2"). Useful alternatives include: https://fepy.com/product/sata-gl70614a-mini-end-cutting-pliers-3-1-2-inch and https://fepy.com/product/sata-gl70618a-mini-end-cutting-pliers-4-1-2-inch

Yes—clear anti-rust coating prolongs tool life, chrome-nickel steel provides strength, laser- and induction-hardening boost edge durability, and the soft two-tone TPE handles reduce hand fatigue during extended use.

A great scenario is jewelry making—trimming head pins flush to beads or components in tight spaces—or electrician work where small wires need precise, flush cuts near a surface without marring the workpiece.

Grip the tool firmly with the jaws perpendicular to the cut line, place the cutting edge flush against the surface or component, and apply smooth, steady pressure directly toward the cut. Let the hardened edges do the work and avoid forcing the tool.