قلم التحديد يوني بول (PX-20) للاستخدام على الأسطح المتنوعة مقاوم للماء والأشعة فوق البنفسجية لون أسود

You can use the PX-20 on metal, glass, wood, plastic, stone, and many other non-porous materials. Its multi-surface ink is built for visibility on both dark and light backgrounds.

Yes. The ink is waterproof and UV-resistant, helping the color stay vibrant and legible outdoors even under sunlight and weather exposure.

Shake the marker with the cap on, remove the cap and press the tip onto scrap surface to prime, then apply with steady pressure. For fine lines, use light pressure; for bolder lines, apply a bit more pressure. Keep the cap on when not in use to prevent drying.

It features a no-bleed formula that helps keep lines clean. Still, test on a scrap area first on porous surfaces, and allow a moment for the ink to dry to prevent smudging.

The PX-20 has a durable bullet tip designed to deliver consistent performance and long-lasting lines even with frequent use.

The PX-20 markers are not designed for refilling; when the ink runs dry, replace the marker. The tip is built to endure typical use and maintain line integrity.

Absolutely. Its opaque ink and weather resistance make it versatile for both indoor labeling and outdoor signage, crafts, and DIY projects.

Use in a well-ventilated area. Avoid ingestion and prolonged skin contact. Keep the marker capped when not in use to prevent drying and store away from children and flames as a precaution typical for solvent-based markers.

If you’re weighing options, you can compare with similar multi-surface paint markers on Fepy to suit different tip styles or budgets. For example, you might explore Uniball PX-21 (slightly different tip width) at https://fepy.com/product/uniball-px-21 or a versatile Posca option like Posca PC-1M Black at https://fepy.com/product/posca-pc-1m-black to see how the results differ on your chosen material.

Outdoor labeling, durable signage, metalwork markings, craft projects on wood or plastic, and any application requiring a bold, fade-resistant mark that remains legible under sun and moisture.

Grab the marker, shake with the cap on to mix the ink, remove the cap and prime on scrap material, then begin your project with steady pressure. Cap again after use to prevent drying, and store it upright in a cool, dry place.