طلاء مستحلب قشر البيض أكرليك البوليمر غير اللامع من ناشونال

It is designed primarily for interior walls and ceilings, including plaster, drywall, and concrete substrates. It can also be used on prepared wood trim, doors, and certain metals after proper priming. For bare or highly porous surfaces, a primer is recommended to improve adhesion and finish quality.

This product provides a durable matte (eggshell) finish with easy cleaning. Coverage depends on surface porosity and application method, and is typically listed on the label. Drying times vary with temperature and humidity; surfaces may be touch-dry within a short period and recoating is usually possible after a few hours. The formulation is low odor and low VOC, designed for safer indoor use.

1) Stir well before use. 2) Prepare the surface (clean, repair cracks, sand glossy areas). 3) Prime bare wood/metal if needed. 4) Apply with a brush or roller for walls and ceilings, or a spray for large areas. 5) For best results, apply two coats, allowing adequate drying time between coats. 6) Clean brushes and tools with water after use. Avoid over-thinning unless the label specifies otherwise.

Yes, it can be used on many common interior substrates including wood, drywall/plaster, and compatible metals with proper surface preparation. Bare or porous surfaces typically require a suitable primer to ensure uniform adhesion and finish. For sealing stains or stains from previous finishes, use an appropriate stain-blocking primer first.

The Eggshell Emulsion (Matt) offers a true matte eggshell finish with minimal sheen and excellent hide. If you prefer a slightly shinier surface that’s easier to wipe, you might opt for the Eggshell Emulsion (Satin). Both are designed for interior walls, but the Satin version will reflect more light and may show more surface imperfections. Compare here: https://fepy.com/product/national-eggshell-emulsion-satin

National Premium Eggshell Emulsion (Matte) is a premium variant that typically emphasizes enhanced leveling, durability, and coverage. It is conceptually similar but may offer easier application and slightly improved stain resistance. See: https://fepy.com/product/national-premium-eggshell-emulsion-matte

Yes. If you’re prioritizing ultra-low VOCs and environmental friendliness, you can explore National Eco-Friendly Eggshell Emulsion (Low VOC) on Fepy. It’s designed for similar interior uses with an emphasis on lower VOC content. See: https://fepy.com/product/national-eco-friendly-eggshell-emulsion-low-voc

Ideal for interior walls and ceilings in living rooms, bedrooms, hallways, offices, schools, and other residential or commercial spaces. It’s suitable for walls, trim, doors, and shutters where a durable, easy-to-clean matte finish is desired. It’s particularly good for areas with moderate traffic and where a quiet matte look is preferred.

Start by cleaning the surface and addressing any cracks or holes. Sand glossy areas to create tooth for adhesion. Remove dust and allow to dry. Prime bare wood, metal, or very porous surfaces with an appropriate primer. If painting over a dark color or stained surface, use a stain-blocking primer to prevent bleed-through and achieve a uniform finish.

Yes. It is water-based with low odor and low VOC design, making it suitable for indoor use in occupied spaces. Always ensure good ventilation during application and follow the label’s safety guidance, including using protective gear as needed and keeping the product out of reach of children during use.

Store the can upright in a cool, dry place, sealed tightly when not in use. If the can thickens, stir thoroughly before use. Clean brushes and tools with water. If you’re not satisfied with the product, check Fepy’s return policy for conditions and timeframes. Returns typically apply to eligible, unused products in original packaging within the policy window.