طلاء جارد إيبوكسي من ( National ) طبقة تغطية معالجة بأساس من البوليميد للأرضيات - لون (Silver Grey) - حجم (18L)

Yes, National Guard Epoxy Flooring Topcoat is formulated with excellent resistance to chemicals, acids, and alkalis, making it suitable for areas where exposure to such substances is expected.

The National Guard Epoxy Flooring Topcoat is a solvent-based, two-pack epoxy topcoat designed primarily for light-duty flooring applications. It provides a durable finish for concrete and cement floors, as well as steel surfaces, offering good adhesion and resistance to mild chemicals and water.

The topcoat has a volume solid content of 55 ± 2% and a specific gravity of 1.40 ± 0.05 (mixed colour). It has a theoretical spreading rate of approximately 5.5 m²/L and requires a dry film thickness (DFT) of 70-100 microns per coat.

Application can be done using airless spray, air spray, or brush methods. The recommended mixing ratio is 4 parts base to 1 part hardener, and it is advised to thin the mixture with National Epoxy Thinner by 5-10% depending on the application method.

At 30°C, the touch dry time is approximately 3-6 hours, with a minimum recoat time of 10 hours and a maximum of 3 days. Full curing takes about 7 days under optimal conditions.

The National Guard Epoxy Flooring Topcoat has a shelf life of 18 months when stored in original sealed containers at temperatures around 30°C. Proper storage conditions are essential to maintain its quality.

While primarily designed for indoor use, it can be utilized in outdoor applications as long as it is protected from direct sunlight and extreme weather conditions. Proper surface preparation is crucial for outdoor applications.

It is important to ensure adequate ventilation during application, as the product contains solvents that may release harmful fumes. Users should wear appropriate personal protective equipment (PPE), including gloves and masks, to ensure safety while handling the product.

Yes, surfaces must be clean, sound, and free from oils, grease, dust, and loose particles. For new concrete floors, allow at least 28 days for curing before applying the topcoat. Existing surfaces should be mechanically prepared to remove contaminants.

The National Guard Epoxy Flooring Topcoat is a two-pack chemical-resistant topcoat based on polyamide-cured epoxy resin, designed for concrete floors. It offers good adhesion, abrasion resistance, and chemical resistance.

The product has a volume solids content of 55 ± 2%, a specific gravity of 1.40 ± 0.05 when mixed, and a recommended dry film thickness of 70–100 microns per coat. The theoretical spreading rate is approximately 5.5–6 m²/L.

The topcoat is touch dry within 3–6 hours, ready to recoat after a minimum of 10 hours and a maximum of 72 hours, and fully cured in 7 days.

The product can be applied using a roller, brush, or spray. Thinning with National Epoxy Thinner (5–15% volume) is required depending on the application method.

It is ideal for cementitious surfaces like concrete floors and can also serve as a finishing coat on steel surfaces. It is commonly used in light-duty industrial areas, workshops, and garages.