18L - 810 Broken White طلاء المينا الاصطناعية الزيتي من ناشيونال بينتس

This synthetic enamel paint is designed for both interior and exterior surfaces, providing versatility for various painting projects.

It dries to a high-gloss finish, which not only enhances the aesthetic appeal but also helps repel dust and dirt, making it easier to maintain.

Yes, the paint exhibits excellent adhesion and durability, is resistant to cracks, and can withstand abrasion, ensuring a long-lasting finish.

The colour of this enamel is referred to as "810 Broken White," which offers a bright and vibrant look suitable for various design styles.

While specific drying times may vary based on environmental conditions, synthetic enamels generally dry quickly, allowing for faster project completion.

Yes, the durability and resistance properties of the National Paints Synthetic Enamel make it suitable for use in areas with higher humidity levels without compromising its quality.

National Paints Synthetic Enamel is a high-performance finish designed for interior and exterior surfaces. It provides a durable, chip- and abrasion-resistant coating with low VOC, suitable for high-traffic and high-moisture areas.

It is suitable for interior and exterior walls, as well as wood, metal, masonry, and concrete surfaces, provided the surface is clean, dry, and properly prepared.

The enamel is offered in a wide range of colors and finishes. You can select a sheen level (e.g., gloss or semi-gloss) to match your design and performance needs.

The formulation delivers good resistance to moisture, mildew, UV fading, and general weathering, making it a solid choice for both indoor and outdoor applications.

Ensure the surface is clean, dry, and primed where required. Stir thoroughly before use, apply with your preferred method (brush, roller, or spray), and avoid heavy coats. Allow adequate drying time between coats as indicated on the product label.

Priming is advised on bare wood, metal, or highly porous surfaces. On previously painted surfaces, inspect adhesion, lightly sand, clean, and then apply the enamel.

For optimal durability, follow the guidance on the product label regarding the number of coats and drying times. Drying can be affected by temperature and humidity, so adjust accordingly.

Coverage depends on surface porosity and application method. Check the product can for the stated coverage rate per liter for your specific surface.