طلاء مستحلب National غير لامع باللون White 800 سعة 18LTR

This emulsion is recommended for masonry applications on surfaces such as concrete, plaster, stucco, gypsum board, and asbestos. It is ideal for both interior and exterior projects including flats, offices, and boundary walls, and can also be applied over wooden surfaces.

The key technical specifications include a volume solid content of 44 ± 2%, specific gravity of 1.50 ± 0.05, and a theoretical spreading rate of 11-9 m²/L depending on the surface. The recommended dry film thickness (DFT) is between 40 – 50 microns per coat.

At a temperature of 30°C, the drying time is approximately 1 hour to touch dry, 2 to 4 hours to recoat, and full drying takes about 24 hours. Factors such as humidity and air movement can affect these times.

Yes, National Paints Emulsion Matt contains anti-bacterial and anti-fungal additives, enhancing its durability against mould and mildew. It also offers excellent light and weather resistance along with good alkali resistance.

The paint can be applied using a roller, brush, or spray method. It is recommended to clean the surface thoroughly before application to ensure optimal adhesion and finish quality.

National Paints Emulsion Matt is water-based, which generally makes it more environmentally friendly compared to solvent-based paints. This characteristic contributes to lower VOC emissions during application.

This emulsion can be used on a variety of surfaces including concrete, plaster, stucco filler, gypsum board, asbestos, blocks, and even wood. Its versatility makes it suitable for both residential and commercial applications.

National Paints Emulsion Matt is a high-quality, acrylic copolymer-based emulsion paint designed for both interior and exterior applications. It provides a smooth, flat decorative finish and is washable, making it suitable for various surfaces including concrete and plaster.

This emulsion is ideal for masonry applications on surfaces like concrete, plaster, stucco, gypsum board, and even wood. It is suitable for use in residential and commercial buildings, including flats, offices, and boundary walls.

The paint has a specific gravity of 1.50 ± 0.05 and a volume solids content of 44 ± 2%. The recommended dry film thickness (DFT) is between 40 to 50 microns per coat, with a theoretical spreading rate of approximately 11-9 m²/L depending on the surface.

At a temperature of 30°C, the paint becomes touch dry in about one hour, can be recoated in 2 to 4 hours, and reaches full dryness within 24 hours. Factors like humidity and air movement can affect these drying times.

Yes, National Paints Emulsion Matt contains anti-bacterial and anti-fungal additives, providing additional protection against mould and mildew. It also has good alkali resistance and exceptional light and weather resistance.

The emulsion can be easily applied using a roller, brush, or spray method. It is designed for straightforward application and can be thinned with water if necessary.

This emulsion is versatile and can be used on a variety of surfaces including masonry (concrete, plaster), gypsum board, stucco filler, asbestos, blocks, and even wooden surfaces.