أساس الطلاء ناشونال الأحمر الأوكسيدي (4L)

The primer has a red matte finish, with a volume solids of 53 ± 2% and a specific gravity of 1.53 ± 0.05 kg/L. The theoretical spreading rate is 17 - 13 m2/L, with a recommended dry film thickness of 30 - 40 microns and a wet film thickness of 55 - 75 microns.

The National Paints Red Oxide Primer is recommended as an anti-corrosive primer on steel surfaces in domestic and mildly corrosive environments.

The primer can be applied using airless, conventional, or brush. It requires 5-10% thinning for airless spray and 10-15% for traditional air spray. The recommended thinner is the National G.P. Thinner.

The primer has a touch dry time of 4 hours, a dry to-recoat time of 12 hours, and a hard, dry time of 24 hours at 30°C.

The recommended paint system is: 1 coat of National Red Oxide Primer (40 microns DFT), 1 coat of National Synthetic Undercoat (40 microns DFT), and 1-2 coats of National Synthetic Enamel Gloss I or Gloss II (35+ microns DFT per coat).

The primer has a shelf life of 18 months in original sealed containers when stored under proper conditions at 30°C.

National Paints Red Oxide Primer is a high-quality, solvent-based primer designed for metal, wood, and masonry surfaces. It enhances adhesion, provides rust protection, and prepares surfaces for topcoats to deliver a durable, smooth finish.

It’s suitable for metal, wood, and masonry surfaces. It works well on interior and exterior projects, helping these substrates hold paint longer and resist corrosion.

It’s formulated to provide superior adhesion and corrosion protection across different substrates, helping prevent rust and ensuring a uniform base for topcoats.

The primer is solvent-based, fast-drying, and suitable for interior and exterior use. It offers strong adhesion, rust protection, and good coverage, with resistance to chipping, cracking, and peeling as part of its performance claims.

Clean the surface to remove dirt, grease, and loose rust. For metal, remove loose rust and rough spots; for wood, sand glossy areas. Ensure the surface is dry before priming.

Stir the primer well before use. Apply with a brush, roller, or spray in a smooth, even coat. Allow the first coat to dry before applying a second coat if needed, and follow the label’s recoat timing for the best results.

Typically oil-based enamels or compatible acrylic topcoats pair well with this primer. Always test a small area to confirm adhesion and finish before committing to a large job.

It’s a solvent-based product, so use in a well-ventilated area with appropriate PPE (gloves, eye protection). Ensure good airflow and keep away from open flames or heat sources.