3.6L - 624 Lilac, طلاء مستحلب بلاستيكي من مجموعة ناشيونال بينت

Suitable for interior walls and ceilings as well as exterior masonry and plaster surfaces. It works best on clean, dry surfaces that are free of dust, grease, and loose material.

The product covers up to 6 m2 per liter. With a 3.6 L container, you can expect roughly 21.6 m2 for a single coat under typical conditions. Actual coverage depends on surface porosity and number of coats.

Key features include: quick-drying formula, low odor and low-VOC content, anti-fungal additives for surface protection, good adhesion, and non-fading color stability for long-lasting walls.

Ensure the surface is clean, dry, and smooth. Repair cracks or holes, remove dust and grease, and sand rough spots. Stir the paint well before use and priming is recommended on very porous surfaces or when changing from a dark to a light color.

Stir well before use. Apply with a brush or roller in even coats, maintaining a wet edge to avoid lap marks. For best results, apply a first coat and allow it to dry fully before applying a second coat if needed.

Two coats are commonly recommended for solid color, good coverage, and a uniform finish. The exact number may vary with surface porosity and color change requirements.

The formulation includes color stability features to resist fading and is designed for exterior use. Nevertheless, extreme weather and prolonged exposure can affect color retention, so two coats and proper surface preparation help maximize longevity.

Yes, it is designed for indoor use with a lower odor profile compared to traditional solvent-based paints. Use in well-ventilated areas, wear basic protective gear if needed, and keep away from children and pets during application.

Store with the lid tightly closed in a cool, dry place away from heat and direct sunlight. Do not pour leftover paint down drains. Check local regulations for proper disposal or recycling options for paint containers.

Compared to similar plastic emulsions on Fepy, this product offers: (1) a 3.6 L size for mid-range projects, (2) a 6 m2 per liter coverage rate, and (3) a lilac color option (624 Lilac) with anti-fungal additives. For alternatives, you can explore different sizes and color variants to suit your project.

If you need different quantities, you can consider these commonly offered options on Fepy: 1 L and 4 L or 5 L variants. Examples include: https://fepy.com/product/national-paints-plastic-emulsion-1l-624-lilac, https://fepy.com/product/national-paints-plastic-emulsion-4l-624-lilac, and https://fepy.com/product/national-paints-plastic-emulsion-5l-624-lilac.

You can compare finish and color options by reviewing product pages for related National Paints plastic emulsions in different sizes and colors on Fepy, paying attention to coverage rates, drying times, and any surface prep notes to ensure you pick the best option for your project.