كابل ناشونال الأحادي قياس (16mm) باللون الأصفر و الأخضر

Conductor: copper; Cross-section: 16 mm2; Insulation: PVC; Jacket: yellow–green outdoor sheath; Voltage rating: 300/500V; Temperature range: -15°C to 70°C; Outdoor use: yes; Flame retardant and abrasion resistant.

Plan the run, cut to length, strip insulation with appropriate tooling, and connect to terminals or junction boxes using connectors rated for 16 mm2. Maintain proper bend radii, protect from sharp edges, and route through conduit or suitable enclosure for outdoor exposure. Ensure the circuit is de-energized before starting work.

Yes. It features a yellow-green outdoor jacket designed for outdoor use and resistance to moisture and abrasion. Ensure installation complies with local electrical codes and protect exposed sections from physical damage.

Ideal for single-circuit installations such as lighting runs, heating controls, and other fixed wiring in domestic, commercial, and industrial environments where an outdoor-rated single-core cable is required.

If you need a smaller size, see National Single Core Cable 10mm Yellow Green: https://fepy.com/product/national-single-core-cable-10mm-yellow-green. If you need a larger cross-section for higher current, consider National Single Core Cable 25mm Yellow Green: https://fepy.com/product/national-single-core-cable-25mm-yellow-green.

Choose based on current requirements and length. 16 mm2 is suitable for moderate to high current in short to moderate runs; for longer runs or higher loads, use a larger cross-section such as 25 mm2, and consult a local electrician or follow IEC/BS standards.

You receive the copper single-core cable with a yellow-green outer jacket. Lengths and packaging may vary by listing; refer to the product options for available lengths.

Always work with the power off, use appropriate PPE, avoid moisture exposure during termination, and ensure connections are secure and rated for 16 mm2. Route the cable through conduit or protective channels for outdoor installs.

The cable uses PVC insulation and jacket, is flame retardant, abrasion resistant, and rated for outdoor use with a 300/500V insulation rating. Installers should still follow local electrical codes.

Returns are generally accepted within the stated period if the product is unused and in original packaging. Please check the specific listing for return terms and eligibility.

After installation, perform continuity testing with a multimeter to confirm the conductor is intact, and insulation resistance testing where permitted by local codes to ensure there are no shorts or faults.