معجون فيلر من شركة الأصباغ الوطنية ناشونال حجم (3.6L)

National Stucco Filler is recommended as an interior body filling or surface levelling putty for concrete, plaster, gypsum, masonry, and wooden surfaces. It fills cracks and opens grains and dents to provide a smooth, even finish.

The National Stucco Filler is a high-quality product with a range of technical specifications. It is white in color and provides a matt, smooth finish. The volume solids are 58 ± 2%, with a specific gravity of 1.69 ± 0.05. It has a theoretical spreading rate of 6 m²/L. For application, the recommended dry film thickness (DFT) is 100 microns per coat, while the wet film thickness (WFT) should be 170 microns per coat. At a temperature of 30°C, the drying times are as follows: touch dry in 45-60 minutes, dry to recoat in 3-4 hours, and full dry in 6-8 hours.

National Stucco Filler should be applied using a putty knife, glazing knife, or scraper. It is ready to use and does not require thinning. For best results, 2 coats are recommended.

National Stucco Filler has excellent standability and recoatability. It smoothly covers surface imperfections and provides a levelled smooth finish. It also contains anti-fungal and anti-bacterial additives.

National Stucco Filler has a shelf life of 18 months in its original sealed containers, with proper storage conditions.

National Stucco Filler is recommended for interior applications only. It is not suitable for exterior use.

National Stucco Filler is a ready-to-use, cement-based stucco repair compound designed for interior and exterior walls. It’s a non-shrinking, quick-drying filler that fills cracks, holes, and surface imperfections, and it creates a smooth finish with strong adhesion to bricks, stone, and other common substrates. It can be applied using a trowel, brush, or roller for a seamless repair.

Key specs: 18-liter bucket size; cement-sand blend with additives; non-shrinking formula; quick-drying for faster repairs; suitable for interior and exterior applications; applications via trowel, brush, or roller; adheres well to bricks, stone, and similar surfaces; ready-to-use for convenient repairs.

It’s designed for interior and exterior stucco repairs on walls and other vertical surfaces. Use it to fill cracks, holes, and imperfections on stucco, brick, stone, and similar substrates for a smooth, uniform finish.

1) Clean the surface and remove dust or loose material. 2) If needed, slightly dampen very porous areas. 3) Apply the filler with a trowel, brush, or roller, pressing into cracks and holes. 4) Build up in thin layers as required and smooth the finish. 5) Allow each layer to set; lightly sand if needed once dry. 6) Clean tools with water before the material hardens.

In most cases, a clean, sound surface is sufficient. If the surface is very porous, dusty, or severely degraded, a dampening step or primer may help improve adhesion. Always follow the product guidelines for best results.

Wear gloves and eye protection. Work in a well-ventilated area and avoid skin contact with the wet material. If contact occurs, wash with soap and water. Keep out of reach of children, and store the product in a cool, dry place. Clean tools with water while the product is still wet.

The filler dries quickly to a smooth finish. Drying and full curing depend on temperature and humidity. In typical conditions, you can expect a usable surface within hours and full curing over 24–48 hours.

National Stucco Filler is a ready-to-use, non-shrinking filler designed for cracks and holes with easy application and good adhesion. Stucco Repair Mortar is often a traditional mortar mix that may require more work to apply and cure. For a direct contrast, see the Stucco Repair Mortar product here: https://fepy.com/product/stucco-repair-mortar