طلاء مركب أساس (PVA) من (National) باللون الأبيض سعة (18L)

This compound offers a white finish, dries quickly, and creates a durable protective layer. It is resistant to humidity, preventing mould and fungi growth, and is washable for easy maintenance.

It can be used on a variety of surfaces including cement plaster, concrete, and rendered surfaces. The substrate must be clean, dry, and free from contaminants for optimal adhesion.

One 18-litre container of the National Texo Compound can cover approximately 6.2 to 0.3 m² per litre, depending on the film thickness applied and the surface porosity.

Drying times vary based on environmental conditions. At 23°C and 50% relative humidity, it typically becomes touch dry in about 10 hours and hard dry in approximately 7 days.

The product is best applied using a spray technique with a gravity-feed hopper gun. It can also be diluted with water (up to 10%) for easier application.

Yes, it is water-based and formulated to be safe for both the environment and human health, making it suitable for various decorating projects.

Users should ensure good ventilation during application, avoid skin contact, and handle the product with care.

It is a PVA emulsion-based compound used as a primer or bonding agent in construction projects such as plastering or painting.

Yes, it can be diluted with water as per application requirements.

Yes, it enhances adhesion between surfaces like concrete and plaster or between old and new layers of paint or mortar.

It is suitable for both interior and exterior applications due to its strong bonding properties.

Yes, when mixed properly with cement or mortar, it helps prevent cracking in plastered surfaces.

It can be applied using a brush or roller on clean surfaces free from dust or grease.

Yes, being water-based makes it an environmentally friendly option compared to solvent-based alternatives.