المادة اللاصقة للبلاط نيتوبوند من فوسروك باللون الرمادي وزن (25kg)

It bonds to ceramic tiles and is suitable for fixing on insulating and acoustic boards made from expanded polystyrene (EPS).

The formulation is a tropical-grade mix designed to perform well under the Middle East climate, delivering reliable adhesion and stability in humid, hot conditions.

Extended open wet time provides a longer working period to adjust tile positions and achieve precise alignment before the adhesive sets.

High adhesive bond strength, good slip resistance to keep tiles in place during installation, moisture resistance for humid environments, and durability over time.

Mix the powder with clean water to a lump-free, creamy consistency. Apply using a suitable trowel with back-bedding or thin-bed methods, ensuring an even coat and proper tile contact.

Apply in conditions that avoid extreme heat or cold and follow substrate pre-wetting guidelines. Allow adequate ventilation and keep the working area clean and free of dust.

Store in a dry, shaded area off the ground with the packaging sealed. Wear appropriate PPE (gloves, eye protection) during handling and avoid skin contact with the powder and adhesive mix.

Curing time depends on substrate, thickness, and conditions. Allow sufficient time for initial cure before grouting, following standard tiling best practices for your project.

Yes. The product is designed for ease of use by both DIY enthusiasts and professionals, offering straightforward mixing and application while delivering reliable performance.

If you need to return the product, follow Fepy's standard returns procedures for unopened or sealed packaging within the applicable return window.

You can explore related tile adhesives on Fepy.com via these search result links to compare options: https://www.fepy.com/search?q=tile+adhesive and https://www.fepy.com/search?q=fosroc+nitobond