NITOTILE S2 25KG FOSROC

- Polymer-modified formulation for improved bonding and flexibility - Suitable for interior and exterior tiling - Good open time and slip resistance for easier alignment - Compatible with ceramic and porcelain tiles - Suitable for wet areas and damp environments

- Bag weight: 25 kg - Mix with clean water to achieve a workable mortar (typical range 5–6 L water per bag, exact ratio per Fosroc guidance) - Open time: approximately 20–30 minutes (temperature/humidity dependent) - Pot life: around 2 hours - Bed thickness: typically 2–6 mm (adjust based on tile size and substrate) - Coverage: varies with tile size and bed depth; expect roughly 4–5 m² per bag for medium tiles at a 2 mm bed (actual coverage depends on tile size and substrate roughness) - Suitable tile types: ceramic and porcelain

Compatible tile types include ceramic and porcelain tiles. Substrates typically include concrete, cement render, and plaster. For exterior or textured substrates, ensure the surface is sound, clean, and primed as required.

Step-by-step: 1) Clean and dampen the substrate. 2) Add the dry powder to a clean container and gradually add water while mixing to a lump-free, creamy consistency. 3) For tiles, use a suitable notched trowel (often 6–8 mm for medium to large tiles) to apply the adhesive on the substrate and to back-butter the tile if required. 4) Press the tile firmly, twist slightly, and adjust spacing to achieve even joints. 5) Allow the adhesive to set before grouting (follow local guidelines).

Use a notched trowel appropriate for your tile size (commonly 6–8 mm for medium to large tiles). A 2–6 mm bed thickness is typical, depending on tile size, substrate irregularities, and tile type. Back-buttering may be beneficial for achieving full tile contact on dense porcelain tiles.

Grouting is typically possible after the adhesive has matured and achieved initial set, which is usually within 24–48 hours, depending on environmental conditions. Ensure the tile surface is clean and free of adhesive above the grout line before grouting.

Store in a cool, dry place away from direct sunlight and moisture. Keep the bags tightly closed when not in use. Shelf life is typically around 6–12 months if stored properly.

Yes. Wear appropriate PPE such as eye protection, gloves, and a dust mask when handling dry powder and mixing. Avoid skin and eye contact with wet mortar. Work in a well-ventilated area and wash exposed skin with soap and water after use. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

NITOTILE S2 generally offers enhanced slip resistance and a higher bond performance suitable for larger tiles and more demanding substrates, while NITOTILE S1 is typically a standard-grade tile adhesive. If you’re choosing between them, consider tile size, substrate condition, and exposure level. For reference, you can review the product pages: NITOTILE S1 25KG Fosroc: https://fepy.com/product/nitotile-s1-25kg-fosroc and NITOTILE S2 25KG Fosroc: https://fepy.com/product/nitotile-s2-25kg-fosroc

Fepy typically offers returns on unused items within a specified timeframe; check the site’s return terms for eligible items and conditions. If you need to return, ensure the packaging is unopened and the product is in resaleable condition, and initiate the return within the allowed window.