Question 1

What are the core features of the Nut Setter S2 Steel?

Accepted Answer

Key features include a variable speed operation for controlled driving, a quick-release chuck for fast bit changes, durable S2 steel construction for long-lasting use, and an ergonomic, non-slip handle for comfortable, secure operation.

Question 2

How do I determine the right nut size and torque when using the Nut Setter S2 Steel?

Accepted Answer

Start by matching the nut size to the fastener and consult the project requirements. Use the adjustable depth setting to seat the nut without over-driving it. If you’re unsure, test on a spare fastener or a scrap piece to dial in the correct depth and torque before working on the final assembly.

Question 3

What is the return policy for the Nut Setter S2 Steel?

Accepted Answer

If you’re not satisfied, you can review Fepy’s return options for unused items within the specified return window and packaging requirements. Refer to Fepy’s return policy on the product page for exact terms and conditions.

Question 4

How should I maintain and care for the Nut Setter S2 Steel?

Accepted Answer

Keep the tool clean and dry after use to prevent corrosion. Wipe down the quick-release chuck and bit shank, and inspect the depth-setting mechanism for smooth operation. Lubricate moving parts as needed per general tool maintenance guidelines and store in a dry place.

Question 5

Are there recommended usage guidelines or setup tips I should follow?

Accepted Answer

Yes. Start with the lowest practical speed to maintain control, especially with delicate fasteners. Set the depth to slightly below the final seating depth so you can feel when to stop. Use the quick-release chuck to select the correct bit, and ensure the shank fully seats in the drill chuck before applying torque. Always test on a scrap piece if you’re unsure of the depth or torque needed.

Question 6

How does the Nut Setter S2 Steel compare to other Nut Setters on Fepy?

Accepted Answer

For quick comparisons, you can view similar options on Fepy: Nut Setter S1 Steel (lighter, for smaller fasteners) and Nut Setter S3 Steel (designed for larger nuts and higher-capacity use). See product pages: https://www.fepy.com/products/nut-setter-s1-steel and https://www.fepy.com/products/nut-setter-s3-steel

Question 7

What safety considerations should I keep in mind when using this tool?

Accepted Answer

Safety tips: wear eye protection and gloves as needed; ensure the bit is properly seated in the chuck before operation; start at a lower speed to maintain control; do not exceed recommended depth to prevent over-tightening or damage; keep hands and loose clothing away from the rotating chuck; inspect the tool for damage before use.

Question 8

What kinds of projects is the Nut Setter S2 Steel best suited for?

Accepted Answer

Ideal for mechanical assemblies, automotive maintenance, bike repairs, and furniture building where quick, precise nut setting is beneficial. It's especially useful when you need controlled depth and consistent seating for fasteners.

Question 9

How do I use the Nut Setter S2 Steel?

Accepted Answer

Steps: 1) Attach the Nut Setter S2 Steel to your drill/driver using a 1/4-inch hex shank. 2) Adjust the depth setting to the desired level for your nut/bolt size. 3) Securely position the nut/bolt and initiate slow, controlled drilling to drive it in. 4) Use the quick-release chuck to swap bits as needed. 5) Stop once the nut is properly seated to avoid over-tightening. 6) Remove and store after use.

Question 10

What are the technical specifications of the Nut Setter S2 Steel?

Accepted Answer

Specifications highlight: material is high-grade S2 steel; adjustable depth setting for precise nut/bolt installation; ergonomic design and secure grip; compatible with standard drill/drivers via a 1/4-inch hex shank (as with typical nut setters); includes a quick-release chuck for easy bit changes; designed for long-term durability.

Question 11

What is the material composition of the 10mm Nut Setter?

Accepted Answer

The 10mm Nut Setter is made from S2 steel, which is a type of shock-resisting tool steel. Its composition typically includes 0.4-0.55% carbon, 0.3-0.5% manganese, 0.9-1.2% silicon, and small amounts of molybdenum and vanadium, contributing to its durability and impact resistance.

Question 12

What is the Nut Setter S2 Steel used for?

Accepted Answer

The Nut Setter S2 Steel is a hand-held fastening tool designed to drive nuts and bolts into place with controlled precision. It’s built for quick, consistent nut setting in DIY projects and professional work, using a drill/driver to apply torque with an adjustable depth setting for accurate installation.

Question 13

Can the 10mm Nut Setter be used with various power tools?

Accepted Answer

Yes, the 10mm Nut Setter is compatible with a range of power tools including pneumatic screwdrivers, electric screwdrivers, and air drills, making it versatile for different fastening tasks.

Question 14

What is the expected lifespan of a nut setter made from S2 steel?

Accepted Answer

With proper care and usage, a nut setter made from S2 steel can have a long lifespan due to its durable construction and wear-resistant properties. The black manganese phosphate coating also helps protect against rust and wear.

Question 15

How does the nut setter's design enhance usability?

Accepted Answer

The nut setter features industrial-strength magnets, which provide extra retention during operation, ensuring that fasteners remain securely in place. Additionally, it has colour-coded size markings for easy identification.

أداة شد و ضبط الصواميل قياس (10mm)

Features & Benefits

Specification

Attachments

Customer Reviews

Frequently Asked Questions