شفرات احتياطية متينة من أولفا لقاطعة (H-1) مقاس (25mm) مصنوعة من الفولاذ الكربوني ضمن علبة من (5) قطع

Key specs: 25 mm blade width, carbon steel construction, rust-resistant coating to extend blade life, and a case of 5 blades. These features are geared toward long-lasting sharpness and reliable performance in industrial tasks.

These blades are designed for heavy-duty cutting tasks, including cardboard and thick plastics, providing clean and precise cuts with durable performance.

The blades are engineered for longer-lasting sharpness and durability in industrial use. Actual blade life depends on the material being cut and the frequency of use, but you should expect extended sharpness compared with standard blades.

Step-by-step: 1) Ensure the cutter is off and the area is safe. 2) Open the blade housing and remove the old blade carefully. 3) Insert a new OL-HB-5B blade with the edge facing the correct direction. 4) Close the housing securely and test on scrap material to confirm a clean cut.

Always wear cut-resistant gloves, keep fingers away from the blade edge, handle blades by the sides or through protective packaging, and ensure the cutter is powered off and stable during replacement.

On Fepy, you can explore these alternatives to compare features and pricing: 1) Olfa Replacement Blades for H-1 Cutter, 25mm, 5-Pack (https://fepy.com/product/olfa-replacement-blades-h1-cutter-25mm-5-pack) — standard replacement blades with similar 25 mm sizing. 2) Olfa H-1 Cutter Heavy-Duty Blade 25mm (https://fepy.com/product/olfa-h1-cutter-heavy-duty-blade-25mm) — a variant focused on heavy-duty performance. The OL-HB-5B set is specifically described as a heavy-duty option with rust-resistant coating for extended life.

Use cases include cutting cardboard for packaging, thick plastic sheets, foam board, and other industrial materials where a sharp, durable blade is beneficial for clean, precise cuts.

Store blades in their original case or a protective sheath in a dry, cool place away from moisture and humidity to prevent rust and maintain edge quality.

The OL-HB-5B blades are designed for the H-1 Cutter. For use with other models, verify compatibility with the specific cutter’s blade housing and width requirements before use.