كابل كهربائي بلاستيكي (PVC) من شركة الكابلات العمانية باللون الأزرق قياس (4mm) طول (100Yard)

The 4 mm refers to the conductor diameter. The copper core is encased in PVC insulation to provide electrical insulation, protection, and environmental resistance.

100 yards is approximately 91.44 meters (about 300 feet).

The cable uses a copper conductor with PVC insulation. The PVC layer provides insulation, some resistance to moisture and abrasion, and helps with heat tolerance and fire safety considerations.

The cable is rated for up to 600 volts and can operate up to 85°C. These ratings indicate suitability for many standard indoor wiring tasks under typical conditions.

Yes, the insulation provides resistance to sunlight, which supports some outdoor use. However, for prolonged outdoor exposure or harsh environments, additional protection (like weatherproof conduits or enclosures) is recommended to maximize longevity.

PVC-insulated single-core cables are generally reasonably flexible for indoor runs, especially when routed through conduits. Flexibility can vary with installation conditions and bend radius, so plan bends carefully and avoid sharp kinks.

Common uses include internal wiring runs for outlets, lighting circuits, or low- to medium-load installations in residential and office settings, as well as temporary wiring in controlled environments where a single copper core is appropriate.

Turn off power before starting. Strip insulation cleanly, use appropriate crimp or screw-type terminals, and secure the cable using suitable conduits or cable trays. When running outdoors or in damp areas, use weatherproof fittings and maintain a safe distance from water sources. Avoid bending beyond the recommended bend radius to prevent conductor damage.

This cable uses copper conductors with PVC insulation and is designed for safe electrical transmission up to 600V. Follow local electrical codes, ensure proper termination, and use appropriate protective enclosures or conduits. The insulation is designed for resistance to sunlight, water, and oils, but confirm compatibility with your specific environment and installation conditions.

If you’re choosing among PVC single-core cables on Fepy, consider cross-sectional size, length, and environmental exposure. For example, you might compare to a 2.5 mm or 6 mm single-core option to balance current capacity, flexibility, and required length. For reference, see these alternatives on Fepy: - Oman 4mm x 50 Yard PVC Single Core Cable - Blue: https://fepy.com/products/oman-4mm-50-yard-pvc-single-core-cable-blue - Oman 2.5mm x 100 Yard PVC Single Core Cable - Blue: https://fepy.com/products/oman-2-5mm-100-yard-pvc-single-core-cable-blue - Oman 6mm x 100 Yard PVC Single Core Cable - Blue: https://fepy.com/products/oman-6mm-x-100-yard-pvc-single-core-cable-blue

Consider the required current load, the installation environment (indoor vs outdoor, exposure to sunlight, oil or water), the required length, and the ease of routing. If you need longer runs or better current capacity, compare with larger cross-sections; if you need greater flexibility or shorter runs, a smaller cross-section might suffice. Also weigh the cost per meter and the total project cost to gauge overall value.