صمام عوامة ضبط مستوى المياه النحاسي من بيجلر قياس (2")

It's an automatic water level control device designed to fill storage tanks, cisterns, and industrial water systems. The 2-inch brass float valve activates a shutoff mechanism to maintain a chosen water level without manual intervention.

Key features include a solid brass body with a heavy-duty arm assembly for durability, high flow capacity for rapid tank filling, corrosion resistance for long-term water exposure, and an adjustable arm for precise level control coupled with a reliable shutoff to prevent overflow.

Material: solid brass with a heavy-duty arm; Inlet size: 2 inches; High flow capacity for fast filling; Corrosion resistant; Adjustable arm for precise level control; Reliable shutoff mechanism; Ideal for water storage tanks, cisterns, and industrial use.

1) Shut off the water supply. 2) Drill or prepare the tank opening for a 2-inch valve as specified by the installation kit. 3) Insert the valve and seal with the provided gasket or thread sealant. 4) Tighten fittings and mount the arm so it can move freely. 5) Connect the inlet/outlet plumbing, then adjust the arm to set the desired fill level. 6) Restore water supply and test the fill cycle, making small adjustments as needed.

Best for water storage tanks, cisterns, and industrial storage systems where automatic fill control and reliable shutoff are important to maintain target water levels and prevent overflow.

The adjustable arm lets you set the float position that triggers shutoff, enabling precise control over the tank’s target water level. Tweak the arm angle or length as required to fine-tune the fill point.

The valve uses a robust brass construction with a corrosion-resistant profile and a proven shutoff mechanism to prevent overflow, contributing to long-term reliability in challenging water environments.

Compared to smaller or non-brass variants, this 2" Pegler valve provides higher flow for faster filling and greater durability in demanding settings. For a closer comparison, you can look at similar Pegler options like the 1-1/2" or 1" brass float valves to see differences in capacity and fit: https://fepy.com/pegler-pg518013-brass-float-valve-1-1-2-inch and https://fepy.com/pegler-pg518012-brass-float-valve-1-inch.

If you need alternatives, consider: Pegler PG518013 1-1/2-inch brass float valve: https://fepy.com/pegler-pg518013-brass-float-valve-1-1-2-inch and Pegler PG518012 1-inch brass float valve: https://fepy.com/pegler-pg518012-brass-float-valve-1-inch. There’s also a 2-inch variant you can compare with: https://fepy.com/pegler-pg518015-brass-float-valve-2-inch.

Yes. The design emphasizes high flow capacity and a heavy-duty arm, making it suitable for larger tanks and more demanding industrial applications where faster filling and dependable level control are required.

Yes. With the provided gasket/sealant and standard 2-inch connections, you can install it using typical DIY plumbing practices. Ensure proper alignment of the arm, secure fittings, and perform a test fill to confirm correct operation.

Periodic inspection of the arm movement, checking for leaks around threaded connections, and ensuring the float mechanism isn’t obstructed by debris will help maintain performance. If you notice slow filling or repeated overflow, re-check arm adjustment and tighten fittings as needed.