سلم (Penguin ) بجانب واحد من الألياف الزجاجية بحمولة وزنية قصوى (150Kg)

If you want to compare with similar options on Fepy, check these pages: the 6-step variant at https://fepy.com/product/penguin-fibreglass-single-sided-step-ladder-6-steps and the 8-step variant at https://fepy.com/product/penguin-fibreglass-single-sided-step-ladder-8-steps. These pages offer side-by-side specs and help you choose based on reach and project needs.

Confirm the number of steps (10), reach height (2.8 m), weight capacity (150 kg), material (fibreglass), insulation properties (non-conductive), and the doorway/footprint stability features. Also consider where you’ll use it (indoor/outdoor) and how portable you need it to be.

Fibreglass ladders typically conform to common ladder safety guidelines and regional standards. For exact certifications and compliance details, refer to the FGSSPT-10 product page on Fepy, which lists the applicable standards for this model.

All three variants share the same fibreglass construction and 150 kg load capacity, but differ in reach and step count: the 6-step model is shorter with a lower reach, the 8-step model increases height and work reach, and the 10-step FGSSPT-10 provides the tallest reach (2.8 m) among them. For direct product pages, you can compare: 6-step at https://fepy.com/product/penguin-fibreglass-single-sided-step-ladder-6-steps and 8-step at https://fepy.com/product/penguin-fibreglass-single-sided-step-ladder-8-steps while viewing FGSSPT-10 here.

Fiberglass ladders are well-suited for outdoor use due to their weather resistance and non-conductive properties. Ensure you set it up on stable ground, be mindful of wind, and store it properly when not in use to maintain its condition.

Regularly wipe down the fiberglass surfaces with a damp cloth to remove dust and debris. Inspect for cracks, loose joints, or damaged feet, and store the ladder in a dry area away from direct sunlight when not in use. Avoid harsh solvents that could degrade the fibreglass.

Set up on a dry, level surface with the feet fully contacting the ground. Place the ladder at a comfortable angle (roughly 75 degrees is a common guideline), keep three points of contact while climbing, avoid leaning or overreaching, and never stand on the top three steps. When in use, ensure the area around the ladder is clear of obstacles and use the ladder on stable footing.

Ideal for electrical tasks, painting, maintenance, and other activities that require a stable, insulated platform at height. Its fiberglass construction helps reduce the risk of electrical conduction and offers durable, weather-resistant performance.

A single-sided design means you can use the ladder against a wall or structure on one side, providing a stable work surface with easy access to height. It’s typically lighter and easier to maneuver than double-sided variants, with a straightforward setup.

The ladder is made of fibreglass, which provides excellent electrical insulation and non-conductive properties, making it suitable for electrical work and environments where insulation is important.

The FGSSPT-10 supports a maximum load of 150 kg, including the user and any tools or materials.

This ladder has 10 steps and reaches up to approximately 2.8 meters in height when extended.

The Penguin FGSSPT-10 is a 10-step fiberglass single-sided step ladder designed for working at height. It offers robust durability, non-conductive properties for electrical environments, and a 150 kg weight capacity, making it suitable for a range of tasks from electrical work to building maintenance.

If you want to compare with similar options on Fepy, check these pages: the 6-step variant at https://fepy.com/product/penguin-fibreglass-single-sided-step-ladder-6-steps and the 8-step variant at https://fepy.com/product/penguin-fibreglass-single-sided-step-ladder-8-steps. These pages offer side-by-side specs and help you choose based on reach and project needs.