Question 1

What are the communication methods supported by the Philips WiZ Pro Phase-cut Bridge Box?

Accepted Answer

The Philips WiZ Pro Phase-cut Bridge Box supports both Wi-Fi and Bluetooth Low Energy (BLE) for communication. It uses Wi-Fi to connect to the WiZ cloud for cloud-based control and remote access, while BLE is used for local messages during installation and connectivity.

Question 2

What is the maximum output load supported by the Philips WiZ Pro Phase-cut Bridge Box?

Accepted Answer

The Philips WiZ Pro Phase-cut Bridge Box supports a maximum output load of 150W. It's designed to work with trailing edge dimmable LED drivers to enable dimming features.

Question 3

What is the dimming range offered by the Philips WiZ Pro Phase-cut Bridge Box?

Accepted Answer

The Philips WiZ Pro Phase-cut Bridge Box offers a dimming range from 10% to 100%, using the trailing-edge phase-cut dimming method. If flickering occurs with the default dimming setting, the minimum dimming level can be adjusted from 10% to 50% in the app.

Question 4

What is the lifespan of the Philips WiZ Pro Phase-cut Bridge Box?

Accepted Answer

The Philips WiZ Pro Phase-cut Bridge Box has a lifetime of 50,000 hours under the condition of Tcase_life, with a maximum failure rate of 10%. It also supports 100,000 switch cycles.

Question 5

What is the energy metering accuracy of the Philips WiZ Pro Phase-cut Bridge Box?

Accepted Answer

The Philips WiZ Pro Phase-cut Bridge Box offers energy metering with an accuracy of less than 10% at maximum load. However, it is important to note that the energy metering is for reference use only and not intended for commercial measurement purposes.

Question 6

What wireless standards does Philips WiZ support?

Accepted Answer

Philips WiZ products support Wi-Fi IEEE802.11 b/g and BLE 4.21. They operate on a 2.4 GHz Wi-Fi network.

Question 7

What is the WiZ Click feature?

Accepted Answer

WiZ Click enables users to access two favourite light modes with a flick of their switch and adjust the brightness at power on. It offers easy installation.

Question 8

What is "Last Status Memory" in Philips WiZ?

Accepted Answer

If enabled, the Philips WiZ smart LED stays in the same last power state after a power outage. This ensures that the lights return to their previous setting once power is restored.

لمبة الإنارة الذكية ليد (WiZ) استطاعة (25W) تعمل من خلال واي فاي و (BLE) بشدة إنارة (920-5000K) بقاعدة موديل (G200) باللون (Amber) مكونة من عبوتين

Features & Benefits

Specification

Attachments

Customer Reviews

Frequently Asked Questions