PowerSafe LED Night Light 4 LED 0.5W Oval Shape Assorted Colours with Switch PSNL 69

This LED night light is suitable for low-level guidance lighting in bedrooms, corridors, stair approaches, hotel rooms, staff accommodation, offices and other indoor areas. It can help users identify routes and nearby objects at night, but it should not be treated as the main lighting source or as a certified emergency luminaire.

The stated specifications include four LED light sources, 0.5W nominal power, an oval-shaped body, assorted colours and an integrated switch. The model reference is PSNL 69 and the country of origin is China. Buyers should verify the electrical rating shown on the product label before installation.

With a nominal power rating of only 0.5W, the PSNL 69 has a very small connected lighting load compared with conventional higher-wattage lamps. This makes it practical for extended low-level illumination, although actual energy consumption depends on operating hours and the condition of the electrical supply.

First isolate the relevant electrical supply, inspect the night light for damage and confirm that its marked voltage, frequency and connection type match the intended outlet or fitting. Connect it only in the orientation and manner stated by the manufacturer, restore power and test the integrated switch. A qualified electrician should handle any socket, wiring or circuit modification.

It may be used in the UAE only when the ratings and connection shown on the product label are compatible with the installation. UAE low-voltage supplies are generally 230V at 50Hz, but buyers must confirm the exact marked rating rather than assume compatibility. Installation must follow applicable UAE regulations and the requirements of the relevant local authority, such as DEWA, ADDC or SEWA.

Yes, it can be considered as a supplementary convenience light for residential, hospitality or staff-accommodation fit-outs where low-level nighttime illumination is required. Contractors should include its 0.5W load in electrical schedules, confirm outlet compatibility and obtain consultant approval where applicable. It must not replace code-required general, escape-route or emergency lighting.

No emergency-lighting function, battery backup, maintained operation or compliance certification is stated for this model. It should therefore be used only as a standard night light unless project documentation confirms otherwise. UAE construction projects requiring emergency lighting should use approved emergency luminaires designed and certified for that purpose.

No. The available product data identifies the PSNL 69 as non-dimmable. Use its integrated switch for normal on/off control and do not connect it to a dimmer circuit unless the manufacturer provides written confirmation of compatibility.

No ingress-protection or weather-resistance rating is stated, so it should be treated as an indoor product for dry locations. Do not expose it to rain, water spray, excessive dust or high humidity. Bathrooms, outdoor spaces and active construction areas require equipment with an appropriate IP rating and environmental approval.

Confirm the model number, product-label voltage and frequency, connection type, dimensions, illumination level, colour allocation and required quantity. Because the colours are described as assorted, a specific colour should not be assumed unless confirmed before ordering. For project procurement, also check consultant specifications, sample approval requirements and compatibility with the installed electrical accessories.

Switch off and disconnect the light before cleaning. Wipe the exterior with a dry or slightly damp soft cloth, keep the LED area and ventilation openings free from dust, and avoid solvents or abrasive cleaners. Stop using the unit if the body, switch or electrical connection becomes loose, cracked, discoloured or unusually hot.

Use the product only within the ratings printed on its label and with a compatible, properly earthed or otherwise correctly configured installation as applicable. Do not modify the body, LEDs, switch or electrical connection, and do not cover the light with fabric or insulation. Keep it away from moisture and combustible materials, and have any damaged unit checked or replaced by a competent person.

Match the brand and full model reference: PowerSafe LED Night Light PSNL 69. The listed product has four LEDs, a 0.5W rating, an oval shape, assorted colours and a switch. The FEPY.com SKU is 83879-NOS, which can be used to distinguish it from other PowerSafe lighting products.