PowerSafe LED Night Light Flower Shape Assorted Colours with Switch PSNL 68

This LED night light is suitable for low-level indoor illumination in bedrooms, corridors, stair approaches, guest rooms, apartments, villas, offices and similar spaces. It can help users navigate dark areas at night, but it is not intended to replace general room lighting, construction task lighting or certified emergency lighting.

Check the voltage, frequency, connection type and wattage printed on the product or packaging before use. UAE buildings commonly use a nominal 230 V, 50 Hz supply, but the PSNL 68 must only be connected if its marked electrical rating and connection arrangement are compatible with the intended outlet or fitting.

First isolate the electrical supply where required and inspect the night light, outlet or fitting for damage. Connect the product only to the compatible installation specified by the manufacturer, ensure it is secure and unobstructed, restore power and operate it using the integrated switch. Do not alter the plug, terminals, housing or internal wiring. Any fixed-wiring work should be completed by a qualified electrician.

Yes. The PowerSafe PSNL 68 has an integrated switch for convenient manual control, allowing the night light to be turned on when low-level illumination is needed and switched off when not in use.

No. The listed product specification identifies the PSNL 68 as non-dimmable. It should not be connected to an external dimmer unless PowerSafe documentation specifically confirms compatibility, as an unsuitable dimmer may cause flickering, poor operation or product damage.

It can be suitable for UAE residential and light-commercial interiors when its marked electrical rating, connection type and intended environment match the installation. Before use, confirm compatibility with the outlet or fitting and follow applicable requirements of the relevant UAE electricity authority, municipality and project specifications.

The PSNL 68 may be used after suitable permanent outlets or compatible fittings have been correctly installed and energised in completed interior areas. It is not a substitute for temporary construction lighting, inspection lamps, emergency luminaires or heavy-duty site lights. Keep it away from dust, debris, impact, wet work and unfinished electrical circuits.

Use it only in the environmental conditions stated on its label or manufacturer documentation. No moisture-resistance or IP rating is provided in the listed product information, so it should not be assumed suitable for outdoor locations, wet areas, bathrooms or positions exposed to splashes, condensation or high humidity.

No certified emergency-lighting function, battery backup or emergency duration is stated for this product. It should therefore be treated as a convenience night light rather than a compliant emergency luminaire. UAE construction projects requiring escape-route or emergency lighting should use appropriately specified and approved equipment designed for that purpose.

Confirm the model number, electrical rating, connection type, physical clearance, switching method, indoor-use conditions and non-dimmable specification. Contractors should also review project drawings, authority requirements, socket or fitting compatibility, circuit protection and the product label before approval or installation.

The product uses LED lighting technology, which is generally selected for efficient low-level illumination and reduced maintenance compared with many traditional lamp types. However, its exact wattage, lumen output, colour temperature and energy rating are not stated in the available specifications, so these values should be verified from the packaging or manufacturer data when required for a project schedule.

The PSNL 68 is listed in assorted colours, meaning the exterior colour supplied may vary according to available stock. If a specific colour is important for an interior design, room schedule or project handover requirement, confirm availability with FEPY before ordering.

Switch off and disconnect or isolate the product before cleaning. Wipe the exterior with a soft, dry cloth and do not use water, solvents or abrasive cleaners. Keep ventilation areas unobstructed and stop using the night light if the housing, switch, electrical contacts or cable connection shows heat damage, cracking, looseness or discolouration.

Search for PowerSafe LED Night Light Flower Shape Assorted Colours with Switch, model PSNL 68, or SKU 83882-NOS. Matching the model and SKU helps contractors, facility teams and home users avoid ordering a different night-light design or electrical configuration.