PowerSafe LED Night Light Rainbow Shape Assorted Colours with Switch PSNL 66

The PSNL 66 is suitable for indoor locations such as bedrooms, children’s rooms, hallways, landings, guest rooms and residential circulation areas. In construction and fit-out projects, it may be specified as supplementary orientation lighting rather than as the primary light source for a room, staircase, work area or emergency route.

Before installation, confirm that the fitting or supply point is compatible with the product’s marked electrical rating and connection type. Isolate the electrical supply, follow the manufacturer’s instructions and position the light where it will not be obstructed or exposed to moisture. Any fixed wiring or modification to an electrical circuit should be completed by a qualified electrician.

Compatibility must be verified against the voltage, frequency, plug or fitting configuration and other ratings printed on the product or packaging. UAE buildings commonly use a 230 V, 50 Hz supply, but buyers should not assume compatibility without checking the PSNL 66 rating. Installation must also follow the requirements of the relevant local authority, such as DEWA, ADDC or the applicable emirate-level utility and building regulations.

Yes. The product includes a switch that allows users to control the night light without relying on a separate wall control, subject to the installed configuration. The power supply should still be isolated before cleaning, inspection, removal or electrical maintenance.

No. The listed product specification identifies the PSNL 66 as non-dimmable. It should not be connected to a dimmer circuit unless PowerSafe expressly confirms compatibility, as an unsuitable dimmer may cause flickering, unreliable operation or premature component failure.

No. This LED night light is intended for gentle supplementary or orientation illumination. It should not replace general room lighting, task lighting, code-required staircase illumination or certified emergency and exit lighting in villas, apartments, hotels, labour accommodation or commercial buildings.

Yes, it can be considered for residential, hospitality and interior fit-out projects that require decorative low-level indoor lighting. Contractors should verify the exact model reference PSNL 66, electrical compatibility, mounting or connection arrangement, required quantity and room schedule before procurement. Samples may be useful where colour coordination is important because the unit is supplied in assorted colours.

It should be treated as an indoor product unless the packaging confirms a suitable IP rating for moisture, dust and outdoor exposure. Do not install it near showers, wash basins, exterior walls exposed to weather, gardens or other damp locations without verified protection and compliance with the electrical zoning requirements applicable in the UAE.

Confirm the model number PSNL 66, intended indoor location, product dimensions, electrical rating, connection or fitting type and required quantity. Buyers should also note that colours are assorted, so a specific colour may not be guaranteed unless confirmed during ordering. For project procurement, compare these details with the approved material submittal and lighting schedule.

Assorted colours means units may be supplied in different available colour variants rather than one guaranteed colour. If a project requires an exact colour for room coding, interior design consistency or bulk installation, contact FEPY before ordering to confirm current availability.

Switch off and isolate the power before cleaning. Use a soft, dry cloth and avoid water, solvents, abrasive cleaners or aerosol sprays. Inspect the housing, switch and electrical connection periodically, and stop using the light if it becomes damaged, overheats, flickers continuously or develops a loose connection.

Its rainbow shape and low-level LED illumination can suit children’s bedrooms when correctly installed and supervised. Position it where children cannot pull, tamper with or damage the unit, keep it away from liquids and fabrics, and ensure the socket or electrical point meets applicable UAE safety requirements.

Use the manufacturer model number PSNL 66 and FEPY SKU 83883-NOS when checking quotations, purchase orders, material schedules and delivered items. Model-based verification helps prevent substitution with a night light that has a different shape, switch arrangement, electrical rating or installation requirement.