صمام ذو بوّابة مصنوع من (PPR ) و مقاوم للمواد الكيميائية (20mm)

These valves are commonly utilized in water supply systems, irrigation, and chemical processing industries due to their ability to withstand high pressures and corrosive environments. They are particularly effective in systems requiring low maintenance and high reliability.

Typically, the valve operates at a pressure rating of PN16, suitable for various applications. The body is constructed from PPR material, ensuring resistance to corrosion and a long service life. The valve design allows for easy installation with weldable ends.

The valve operates by raising or lowering a gate within the valve body to start or stop fluid flow. When the gate is fully raised, it allows for unrestricted flow, while lowering it completely stops the flow, making it ideal for on/off control.

Advantages include lightweight construction, resistance to chemical corrosion, and lower thermal conductivity compared to metal valves. Additionally, they require minimal maintenance and offer excellent sealing capabilities.

While PPR valves can handle moderate temperatures, they are generally not suitable for high-temperature applications exceeding 70°C (158°F). For such conditions, alternative materials like brass or stainless steel may be recommended.

The lifespan can vary based on usage conditions but typically ranges from 10 to 20 years under normal operating conditions. Proper installation and maintenance can extend this lifespan significantly.

Yes, these valves often comply with international standards such as ISO and ASTM for quality assurance. Additionally, they may have certifications indicating suitability for potable water applications.

A PPR Gate Valve is a valve made from polypropylene-random copolymer (PPR) designed to control flow in PPR piping systems. When you turn the handle, the internal gate lifts or lowers to start or stop flow, providing a tight seal to prevent leakage. It combines chemical resistance with easy operation and is suitable for various commercial and residential piping setups.

- Material: polypropylene-random copolymer (PPR) for strong chemical resistance - Temperature tolerance: typically from -20°C to +90°C - Sealing: reliable seal to prevent backflow or leaks - Construction: reinforced design for strength and durability - Compatibility: adaptable to a range of pipe diameters and pressure ratings - Handling: lightweight and easy to install and maintain

The self-cleaning design helps minimize buildup inside the valve, reducing maintenance needs and helping maintain smooth operation over time. This means fewer sticking or leaking issues and more consistent flow control in challenging chemical or mineral-rich environments.

The valve is designed to adapt to various pipe diameters and pressure ratings. Exact sizes and ratings depend on the specific model and configuration. Always refer to the product sheet or specification section for the available size options and compatible pressure ranges.

Basic installation steps: - Verify compatibility with your PPR piping and fittings - Shut off the system and drain the line - Cut the pipe square and deburr the edges - Clean the pipe ends to remove debris - Align the valve with the piping and attach using appropriate adapters or connectors - Tighten connections securely and check for alignment - Slowly restore service and test for leaks If your system uses compression or fusion fittings, follow those specific installation procedures.

Maintenance is typically low due to the self-cleaning design. Periodically inspect for leaks around connections, ensure the stem operates smoothly, and keep the accessible surfaces clean. If any leakage or sticking occurs, inspect seals and fittings and replace as needed.

Common applications include residential and commercial water distribution, chemical handling lines, and any PPR piping systems requiring reliable on/off control. Its wide temperature tolerance and chemical resistance make it suitable for varied fluids within the stated limits.