وصلة ذكر (PPR) للتركيب مع الأنابيب قياس ("32mm X 1)

This fitting typically has a pressure rating of PN20, which corresponds to a maximum working pressure of 20 Bar (290 psi) for hot water applications, and PN10 for cold water applications, indicating a maximum working pressure of 10 Bar (145 psi).

The thermal conductivity of the PPR fittings does not exceed 0.24 W/mK at 20°C, ensuring minimal heat loss during the transport of hot water, which is crucial for energy efficiency.

The fitting has a nominal diameter of 32mm and features a 1-inch threaded connection, allowing it to interface seamlessly with other standard piping systems.

The 32mm X 1" PPR Male Union Pipe Fitting complies with several ensuring its quality and reliability in plumbing applications.

Installation should be performed according to manufacturer guidelines, typically involving poly-fusion welding or threaded connections, ensuring a secure and leak-proof joint between pipes.

The impact resistance of the PPR Male Union Pipe Fitting is rated at approximately 52 kJ/m² at +23°C, which indicates its ability to withstand sudden impacts without failure.

Yes, the fittings are designed to be safe for use in drinking water systems, complying with regulations such as BS 6920, which governs materials in contact with drinking water.

A PPR Male Union Pipe Fitting is a connector designed to join two PPR pipes securely with a union-style joint. It uses a push-to-fit connection that creates a quick, leak‑proof seal without soldering or adhesives, making it suitable for both hot and cold water systems.

The product listing references PPR material for durability and corrosion resistance. The item bullets also mention lead-free brass. For exact composition and compliance, refer to the product datasheet or contact Fepy support, as material details can vary by batch.

The PPR Male Union comes in multiple sizes to fit different pipe diameters. To pick the right size, measure your pipe outer diameter (OD) and choose the corresponding PPR size that matches that OD. If in doubt, check the product page for a size chart or contact support.

Yes, this fitting is designed for use in hot and cold water systems. PPR fittings are typically rated for standard domestic hot-water temperatures; consult the product specifications on Fepy for the exact temperature rating applicable to your batch.

Installation is straightforward: cut the pipe square, deburr any edges, ensure the pipe end is clean and dry, and press the pipe into the push-to-fit end until it seats securely. No special tools or solvents are required for the push-fit connection.

You’ll mainly need a pipe cutter to obtain a clean, square cut and a deburring tool to smooth the edge. Ensure the pipes are clean and dry before connecting the fitting.

After installation, gradually introduce water pressure and inspect the joint for any signs of leakage. If you see leaks, re-seat the pipe further into the fitting and press firmly until seated. If leaks persist, re-check pipe size compatibility and surface cleanliness.