Question 1

What is the primary purpose of the PVC Elbow 45 Degree with High Elasticity?

Accepted Answer

This elbow lets you route PVC piping around obstacles by introducing a 45° bend while benefiting from high elasticity and reduced sway, helping to maintain a tight, leak-resistant connection in plumbing and irrigation setups.

Question 2

What sizes and angles are available for this product on Fepy?

Accepted Answer

The listing describes a 45° elbow with high flexibility and states it’s sold per piece. PVC elbows are typically offered in multiple pipe sizes; check the product options on Fepy for the exact diameters available for this specific item.

Question 3

How does the high elasticity benefit installations?

Accepted Answer

High elasticity provides increased resistance to bending stresses and pipe movement, helping to keep joints secure and reduce the likelihood of leaks or blockages while still allowing enough rigidity to minimize sway under load.

Question 4

What are the recommended use cases for this 45° PVC elbow?

Accepted Answer

It's well-suited for plumbing and irrigation applications, especially where piping needs to navigate tight corners or around obstacles while maintaining a robust, leak-resistant connection.

Question 5

How do I install this PVC elbow with pipes?

Accepted Answer

Cut the pipe square, deburr the edges, dry-fit the assembly, then apply a PVC primer and solvent cement rated for PVC. Insert the elbow, hold for the cement to set according to the cement manufacturer's guidelines, and wipe away any excess.

Question 6

What safety or compliance considerations should I keep in mind?

Accepted Answer

Wear appropriate PPE, work in a well-ventilated area when applying solvent cement, ensure the elbow is suitable for the fluid and application (e.g., codes for potable water where required), and follow local plumbing standards. Store the product away from direct sunlight to prevent material degradation.

Question 7

How does this elbow compare to the PVC Elbow 45 Degree Standard?

Accepted Answer

This model emphasizes higher elasticity and reduced sway compared to a standard 45° elbow. If you expect more movement or stress on the joint, the high-elasticity version can offer improved durability. See the alternative here: https://fepy.com/product/pvc-elbow-45-degree-standard

Question 8

How does this elbow compare to the PVC Elbow 90 Degree Flexible?

Accepted Answer

A 45° elbow provides a gentler bend and smoother flow with less stress over time, while a 90° elbow creates a sharper turn that may be necessary in tighter spaces. For comparison, check the 90° flexible option: https://fepy.com/product/pvc-elbow-90-degree-flexible

Question 9

Is this elbow sold individually or in packs?

Accepted Answer

The product is sold per piece, meaning each elbow is sold as a single unit.

Question 10

How can I verify I’m choosing the correct size for my pipe?

Accepted Answer

Measure the pipe’s outside diameter (OD) or refer to its nominal pipe size (NPS). Match this to the elbow’s compatible pipe size, and ensure the solvent cement you plan to use is approved for that PVC size.

Question 11

What makes this elbow a good value compared with metal or other plastic fittings?

Accepted Answer

PVC elbows offer lower weight, easier handling and installation, corrosion resistance, and typically lower upfront costs. The high-elasticity design adds durability against movement and sway, potentially reducing maintenance and leak risk over time.

كوع السباكة البلاستيكي عالي المرونة (PVC) بزاوية (45) قياس (32mm) يباع (Per Piece)

Features & Benefits

Specification

Attachments

Frequently Asked Questions