أنابيب البولي فينيل كلوريد (PVC) قياس (63mm) طول (5.8M) ذات الفئة (CL-16)

Key specs: 63 mm diameter, 5.8 m length, Class 16 rating (high strength), made from durable PVC, corrosion‑resistant, smooth interior, bright white exterior, and a snap‑in connection for quick assembly. It’s designed to withstand elevated pressures and harsh environments while remaining lightweight.

Class 16 indicates a high‑strength rating suitable for demanding applications such as industrial or agricultural piping. It provides higher pressure tolerance and durability compared with lower class pipes, making it a good choice for long runs, exposed outdoor installations, or systems subject to higher loads.

If you’re evaluating options, you can compare similar 63mm Class 16 pipes on Fepy such as: 63mm x 3m Class 16 PVC Pipe: https://fepy.com/product/63mm-x-3m-class-16-pvc-pipe and 63mm x 6m Class 16 PVC Pipe: https://fepy.com/product/63mm-x-6m-class-16-pvc-pipe. These provide different lengths while maintaining the Class 16 strength for flexibility in project sizing.

Common use cases include irrigation mains and distribution lines, agricultural drainage, outdoor water supply lines, garden or greenhouse piping, and any application requiring a robust, corrosion‑resistant pipe with long service life.

Install by cutting the pipe square with a hacksaw, deburr the cut edge, and dry‑fit it with fittings. Use the pipe’s snap‑in connections to join sections and fittings. Ensure proper alignment and avoid over‑bending. For longer runs, support the pipe at regular intervals to prevent sag and maintain planned grade.

Support the pipe at intervals (typically every 1–2 meters depending on load and support conditions), use appropriate clamps or hangers, maintain a steady slope as required for drainage or flow, and avoid tight bends or kinks that could reduce flow or cause stress at joints.

Yes. The pipe is designed to be corrosion‑resistant and suitable for outdoor use. It also offers chemical resistance suitable for many common piping environments, making it a reliable choice where exposure to elements or certain chemicals is a concern.

Wear appropriate PPE such as gloves and eye protection during cutting and handling. Use a properly calibrated hacksaw for cuts, deburr edges to avoid injuries, and ensure proper ventilation if any adhesives or solvents are used with fittings. Follow local safety guidelines when installing piping in outdoor or confined spaces.

Given its 63 mm diameter, 5.8 m length, and Class 16 high‑strength rating, this pipe offers long‑term durability and fewer joints for extended runs, which can reduce installation time and long‑term maintenance. Its corrosion and chemical resistance further contribute to lower replacement costs in demanding environments.

Return options can vary by seller terms. If you need to return, contact Fepy’s support to discuss eligibility, timelines, and any required return authorisation, especially if the item is unused and in original packaging. They can guide you on the available return pathways for this specific product.

Cut the pipe square with a hacksaw, deburr the edges, and dry‑fit into standard 63 mm fittings. For snap‑in connections, simply push the pipe into the fitting until seated. Avoid using heat or solvents unless specified for a different joint type, and test the assembly for leaks after installation.