مقبس الفك ساتا (3/4") الاثنا عشري قياس (29mm) موديل (GL16611)

Off-corner loading reduces fastener rounding by allowing the wrench to engage the flats more securely, especially on larger fasteners or worn fasteners.

The socket is made from premium chrome vanadium steel and features a chrome-plated finish for enhanced strength and corrosion resistance.

It fits 3/4" drive tools and is sized at 29mm. It includes clear size markings to help you identify the metric/SAE sizing at a glance.

The 12-point geometry allows quicker engagement with fasteners and offers more angles for alignment, which is especially helpful in confined areas.

Yes. The robust chrome vanadium construction and 12-point geometry are designed for high-torque, heavy-duty uses such as automotive, industrial, and construction tasks.

Align the socket with the fastener, ensure proper seating, and apply steady torque with the compatible 3/4" drive tool. Use the correct size to avoid rounding and wear.

Wipe regularly to remove dirt and moisture, keep it clean and dry, and avoid dropping or striking the socket against hard surfaces to prevent dents and misalignment.

It’s well-suited for large fasteners in automotive, industrial, and construction contexts where high torque and reliable engagement are needed.

When comparing, consider torque capability, corrosion resistance, and markings for quick identification. Here are a few available alternatives on Fepy you might check: - SATA GL16612 3/4" Drive 12-Point Socket 29mm: https://fepy.com/product/sata-gl16612-3-4-drive-12-point-socket-29mm - SATA GL16621 3/4" Drive 12-Point Socket 29mm: https://fepy.com/product/sata-gl16621-3-4-drive-12-point-socket-29mm - SATA GL16631 3/4" Drive 12-Point Socket 29mm: https://fepy.com/product/sata-gl16631-3-4-drive-12-point-socket-29mm

A 12-point socket offers more contact points and easier alignment in tight spaces, which can reduce rounding risks and speed up engagement for large bolts when access angles are limited.

Always use the correct drive size and socket size, avoid using impact you’re not rated for, and keep the tool dry and free of oil or grease to prevent slippage.