مقبس صدمي سداسي من ساتا (1/2") قياس (11mm) موديل (GL34304)

11mm fastener size, 1/2\" drive, 6-point design, off-corner loading helps reduce fastener rounding, chrome-plated finish for corrosion resistance, and construction optimized for impact use with high-strength materials for durability.

The 6-point configuration distributes torque across the flat sides of the fastener, reducing the risk of rounding and allowing more secure engagement under high torque, which is especially helpful with stubborn or tight fasteners.

It's well-suited for automotive, motorcycle, machinery, and heavy-duty workshop work where 11mm fasteners are used and high torque is required. It performs well for suspension bolts, engine components, and general repair tasks.

1) Ensure your tool has a 1/2\" drive. 2) Align the 11mm hex on the socket with the fastener. 3) Slide the socket onto the fastener and apply steady, controlled torque with the impact driver. 4) Remove and inspect the socket after use, and store it in its case to prevent damage.

Wear eye protection and gloves when working with high-torque fasteners. Ensure the socket fully seats on the fastener before applying torque. Avoid using the socket as a prying tool, inspect for cracks or wear before each use, and store in a dry place to maintain chrome finish.

On Fepy, you can compare this 11mm, 1/2\" drive, 6-point socket with other 11mm options such as the SATA GL34306 and SATA GL34308 variants. These alternatives offer similar sizing with potential differences in geometry or length. For direct comparisons, see: - SATA GL34306 11mm 1/2\" Drive 6-Point Impact Socket: https://fepy.com/product/sata-gl34306-11mm-1-2-drive-6-point-impact-socket - SATA GL34308 11mm 1/2\" Drive 6-Point Impact Socket: https://fepy.com/product/sata-gl34308-11mm-1-2-drive-6-point-impact-socket

Consider compatibility with your tool (1/2\" drive), the exact fastener size (11mm in this case), the design benefits (6-point vs other counts), off-corner loading for reducing rounding, the chrome-plated finish for corrosion resistance, and the overall durability for impact use.

Yes. Its heavy-duty, impact-rated construction and secure 6-point engagement make it suitable for professional shop environments as well as serious DIY projects that involve 11mm fasteners and high-torque requirements.

Keep it dry and clean after use to prevent corrosion. Inspect for cracks or wear before each use. Store in its protective case when not in use, and avoid dropping or striking it against hard surfaces.

If you’re not satisfied with the product, you can return it under Fepy’s standard return policy. Ensure the item is in the original condition and packaging for a smooth return.

The 11mm size is clearly marked on the socket. Always verify the fastener size before use, ensure your tool’s drive is 1/2\", and confirm the socket seats fully onto the fastener to prevent slippage or rounding.