مقبس ساتا السداسي الصدمي العميق (1/2'') قياس (29mm) موديل (GL34422)

The 6-point design grips the flat sides of fasteners, reducing the risk of rounding and providing a more secure, high-torque fit. A 12-point socket can engage more corners and may be easier to locate on a bolt, but it’s generally more prone to rounding under high torque.

The extended depth allows you to reach fasteners that sit deeper in recessed areas, making it easier to access bolts that standard shallow sockets can’t reach.

It’s made from chrome vanadium steel with a chrome finish to provide strength, durability, and corrosion resistance for demanding impact-use.

Off-corner loading helps distribute torque over a larger contact area, reducing the chance of rounding the fastener and improving tool life and safety during high-torque applications.

Ideal for automotive repairs, heavy machinery maintenance, and other industrial tasks where 29mm fasteners are encountered and space is limited.

Pair it with a 1/2" drive impact wrench or ratchet. Ensure the socket is fully seated on the fastener and on the tool’s drive square. Use appropriate torque and avoid using non-impact tools, which can damage the socket.

Yes. Inspect the socket for cracks or wear before use, wear eye protection, avoid hammering or striking the socket, keep your work area dry and clean, and store the socket properly when not in use.

This socket features large, clearly marked size numerals for easy identification at a glance, even in low-light or busy work environments.

If you’re considering nearby sizes, you might look at: 1) SATA GL34421 1/2" Drive 6 Point Impact Deep Socket 28mm: https://fepy.com/products/sata-gl34421-1-2-drive-6-point-impact-deep-socket-28mm 2) SATA GL34423 1/2" Drive 6 Point Impact Deep Socket 30mm: https://fepy.com/products/sata-gl34423-1-2-drive-6-point-impact-deep-socket-30mm

It’s designed for impact use, so for best performance and longevity, use it with an impact wrench or impact-rated ratchet. Using it with a non-impact tool can cause damage.

Keep it clean and dry after use, wipe away any debris or oil, lightly oil the metal to prevent corrosion, and store it in a socket set or case to prevent damage from contact with other tools.