مقبس صدمي سداسي من ساتا (3/4") قياس (28mm) موديل (GL34516)

A 6-point (double-hex) design grips the nut corners more sharply than a 12-point or open-ended design, providing superior torque transfer and minimizing rounding on stubborn fasteners during heavy-duty impact work.

Key specs: 3/4" drive, 6-point socket design, sized for 28mm fasteners, made from high-strength impact-resistant steel, and marked for easy size identification to prevent mix-ups during work.

Ideal for professional automotive, heavy machinery, and construction tasks where high torque is needed. It’s designed to withstand impact loads and is sized for 28mm fasteners commonly found in heavy equipment and vehicle maintenance.

1) Attach the socket to a 3/4" drive impact tool. 2) Ensure the tool is rated for impact use and the fastener size is 28mm. 3) Align the socket with the fastener square and apply steady, controlled torque. 4) Avoid side loading or hammering the handle; allow the impact tool to do the work.

Keep it clean and dry after use, store in a protective case or rack, and inspect for any cracks or wear before reuse. Avoid dropping or striking the socket against hard surfaces, which can cause misalignment or cracks.

The GL34516 is a 3/4" drive socket sized for 28mm fasteners. For other drive sizes or fastener options, you’ll need corresponding sockets or adapters designed for those sizes. Always match drive size and fastener size to prevent damage.

Wear eye protection and gloves, ensure the tool is properly rated for 3/4" sockets, verify the fastener is the correct 28mm size, and keep hands clear of the impact area. Maintain a secure stance and avoid contact with moving parts to minimize injury risk.

It is manufactured from high-strength, impact-resistant steel designed to endure heavy-duty torque and repeated impact without cracking or deforming, extending its service life in professional settings.

Measure the fastener across its flats (the hex faces). If it measures 28mm, this socket will fit. Large markings on the socket help quickly identify the correct size at a glance.

If you’re evaluating close alternatives, you can explore other 3/4" drive 6-point sockets in the same family for nearby sizes: 27mm option at https://fepy.com/product/sata-gl34514-3-4-drive-6-point-impact-socket-27mm and 29mm option at https://fepy.com/product/sata-gl34518-3-4-drive-6-point-impact-socket-29mm. For a different drive size, you could also check a 1/2" drive socket with a 28mm size at https://fepy.com/product/sata-gl34512-1-2-drive-6-point-impact-socket-28mm.

Common use cases include removing or installing large diameter bolts on trucks, heavy equipment maintenance, off-road vehicle repair, and industrial machinery assembly where 28mm fasteners are prevalent and high torque is required.

Yes, the socket features large markings for easy size identification, which helps you pick the correct tool quickly in busy or low-light environments.