مفتاح ربط قابل للعكس من ساتا قياس (25mm) موديل (GL46616)

Head size: 25 mm. Material: chrome vanadium steel with a chrome-plated finish for corrosion resistance. Features a fine-tooth ratchet, off-corner loading design for better grip, and an ergonomic handle.

The flush reversing lever switches the ratchet direction without removing the wrench. The 5° swing means you can engage the next tooth with a very small rotation, making it efficient in tight spaces.

Automotive work, mechanical maintenance, equipment repair, and general maintenance tasks involving larger fasteners.

Fit the 25 mm box end on the fastener, then use the flush reversing lever to select tightening or loosening. You can switch directions without lifting the wrench off the fastener.

Keep it clean and dry after use, apply a light lubrication to the moving ratchet components if needed, and store in a dry case to prevent rust.

Use the correct 25 mm size to avoid slipping, avoid applying side loads or using the wrench as a hammer, and maintain a steady grip and stable stance while working.

For 25 mm work, you can compare these alternatives on Fepy: 22 mm SATA GL46615 Reversible Ratcheting Wrench - https://fepy.com/sata-gl46615-reversible-ratcheting-wrench-22mm, 27 mm SATA GL46617 Reversible Ratcheting Wrench - https://fepy.com/sata-gl46617-reversible-ratcheting-wrench-27mm, and 28 mm SATA GL46620 Reversible Ratcheting Wrench - https://fepy.com/sata-gl46620-reversible-ratcheting-wrench-28mm. Each offers the same ratcheting functionality in different head sizes.

Yes. The 25 mm size is ideal for larger fasteners and, with its durable chrome-vanadium construction and ergonomic design, provides faster operation and long-term reliability relative to non-ratcheting or smaller-size tools.

Fepy offers reversible ratcheting wrenches in several sizes, including 22 mm, 27 mm, and 28 mm, so you can pick the size that best fits your fasteners.

Yes. The 25 mm box end is designed for a precise fit on standard fasteners, and the fine-tooth ratchet minimizes slippage and reduces rounding.

Ensure you’re using the correct 25 mm size, apply steady pressure, keep the wrench perpendicular to the fastener, and rely on the ratcheting action rather than brute force to minimize rounding.