مفتاح ربط ساتا مفتوح الطرف قياس (70mm) موديل (GL48615)

The 70mm open-end size is engineered to fit 70mm fasteners precisely, maximizing torque transfer and reducing slip when turning heavy-duty nuts and bolts.

It’s built from high-strength steel, heat treated for longevity, and coated with a corrosion-resistant finish to withstand heavy-duty use and harsh environments.

Slugging means delivering percussive force with a hammer to loosen stubborn fasteners or apply additional torque. The hammer-striking surface on this wrench provides higher impact force when standard turning isn’t enough.

The safety through hole allows you to thread a wire or string to secure or retrieve the tool in confined spaces, keeping it within reach and preventing loss during complicated tasks.

The stubby beam improves access in tight spaces, while the longer handle increases leverage, enabling more torque with less effort when loosening or tightening tough fasteners.

It’s well-suited for automotive, mechanical, and industrial settings where high-torque slugging is needed and clearances are limited.

Ensure the 70mm opening fits the fastener snugly, keep the tool aligned with the fastener, apply controlled turns, and use the slugging surface with appropriate striking force if required. Wear gloves and eye protection, and never strike off-center or on damaged edges.

Wipe off dirt after use, avoid exposing it to moisture when not in use, apply a light protective coating if needed, and inspect for cracks or wear before each use. Store in a dry area to preserve the coating and steel integrity.

If you’re not satisfied, reach out to Fepy’s support for the return process. Returns are handled under Fepy’s standard policy, with items generally eligible when returned in unused or proper condition within the allowed window and with proof of purchase.

For slightly different fastener ranges, you can compare to these nearby sizes on Fepy: SATA GL48614 Open End Slugging Wrench 68mm (https://fepy.com/product/sata-gl48614-open-end-slugging-wrench-68mm) and SATA GL48616 Open End Slugging Wrench 72mm (https://fepy.com/product/sata-gl48616-open-end-slugging-wrench-72mm). The 68mm and 72mm variants offer similar slugging capability with sizing tailored to different fastener dimensions.