لقم فك نوع شق (5/16") من ساتا (Dr.30l) قياس (12x30mm) مكونة من (5) قطع موديل (GL59417)

The 12 x 30 mm specification refers to the tip width (12 mm) and the overall length of the bit (30 mm). This sizing helps ensure a secure fit and adequate reach in many fastening tasks.

This set is designed for 5/16" drive tools and can be used with 5/16" socket wrenches or ratchets that accept slotted bits.

The bits use a high-quality S2 steel insert, are heat-treated for strength, and feature a corrosion-resistant coating to extend life in challenging environments.

They’re well-suited for automotive work, home improvement, and any task that requires slotted screws where space is limited or access is tight thanks to the 30 mm length.

Ensure the bit seats fully in the screw head, apply steady, perpendicular pressure, and avoid using excessive torque. Use the correct size bit for the screw to minimize slippage and cam-out.

Keep them dry after use to prevent rust, wipe off any debris, and store them in the original display pack or a protective organizer to prevent loss and corrosion.

If you’re comparing options, you can look at these nearby choices on Fepy.com: SATA GL59418-6-piece 5/16" drive slotted bits (6-piece) at https://fepy.com/products/sata-gl59418-6-piece-5-16-drive-slotted-12x30mm and SATA GL59375-5-piece 1/4" drive slotted bits (12x25mm) at https://fepy.com/products/sata-gl59375-5-piece-1-4-drive-slotted-12x25mm. These provide a sense of size, drive compatibility, and build quality in similar product lines.

Yes. The 30 mm length is designed to offer extended reach while still fitting into tighter spaces where longer bits might not be practical.

The set is compact and display-packed, making it easy to carry in a tool pouch, glove compartment, or small toolkit for mobile tasks.

A 5/16" drive is a common size for many automotive and workshop tools, offering strong engagement with compatible sockets and ratchets while remaining compact enough for routine tasks. The 12x30 mm slotted tips are optimized for efficient fastening in regular slot-head screws.

Wear eye protection, keep fingers away from the screw head, ensure the tool is stable during use, and store the bits securely to prevent loss or damage. Avoid using worn or damaged bits, which can slip or break and cause injury.