ساحبات عكسية ثلاثية الفكوك من ساتا قياس (6") موديل (GL90636)

The jaws can be flipped to grab parts from the inside (internal pull) or outside (external pull). Use internal pulling for parts inside a housing and external pulling for parts mounted on a shaft or hub.

The pilot point helps center the screw in the component’s thread or bore, reducing misalignment and making the initial bite smoother.

Heat-treated steel increases strength and fatigue resistance, while the phosphate coating provides corrosion resistance and a cleaner surface that’s easier to maintain.

It’s well-suited for removing gears, bearings, rack pulleys and similar parts. The 6" span covers mid-sized components, giving a balance between reach and grip.

1) Inspect the workpiece and secure it. 2) Flip the jaws to the desired orientation (internal or external). 3) Thread the screw into the center and position the jaws around the part. 4) Apply steady, even pressure to pull, stopping if you feel slippage or unusual resistance.

Wear eye protection and gloves. Secure the workpiece. Use the correct jaw orientation for the job. Apply force gradually and avoid hammering or side loading that could cause the jaws to slip.

Keep it clean after use, remove debris, and apply light lubrication to moving threads. Store it in a dry place to prevent corrosion.

Yes, Fepy offers replacement jaw sets for reversible pullers. Look for GL90636-compatible jaw kits to ensure a proper fit and optimal grip.

Compared with SATA GL90634 3-Jaw Reversible Puller 6", the GL90636 offers a similar 6" capacity with a slightly different jaw profile for certain components. Compared with SATA GL90620 3-Jaw Reversible Puller 5", the GL90636 provides a larger reach for mid-size parts, while GL90620 is better for tighter spaces. For side-by-side specs, see: https://fepy.com/product/sata-gl90634-3-jaw-reversible-puller-6 and https://fepy.com/product/sata-gl90620-3-jaw-reversible-puller-5

If you frequently work with mid-sized hubs, gears or bearings and need internal or external pulling capability in one tool, the GL90636’s 6" capacity, reversible jaws and durable finish make it a versatile choice.

Make sure the jaws are properly seated on flat surfaces, center with the pilot point, apply slow, steady pressure, and never exceed the stated capacity for the part. If resistance remains, stop and reassess alignment or use a penetrating lubricant.