مقص المعدن اليساري ساتا قياس (10") موديل (GL93101)

It cuts up to 1.2mm cold-rolled iron plate and up to 0.8mm stainless steel plate, making it suitable for most sheet metal fabrication tasks that require smooth left-curve or straight cuts.

The left-cut design is engineered to produce smooth left-hand curves and intricate left-turn cuts more readily than a standard straight-cut snip. This is particularly helpful for shaped seams, dashboards, ductwork, or any task requiring precise leftward curvature.

1) Mark the desired left-curved line on your sheet. 2) Align the blade to the line with the bottom blade on the scrap side. 3) Hold the handles firmly with a relaxed grip and apply steady, controlled pressure. 4) Move along the line, rotating your wrist slightly to follow the curve. 5) Keep the workpiece supported and take shallow, progressive cuts to maintain accuracy.

- Length: 10 inches. - Left-cut design for smooth left-hand cuts. - High-grade steel blades for durability and sharpness. - Ergonomic, non-slip handles (red) for comfortable use. - Double-leverage design for enhanced cutting power. - Large pivot bolt for longer blade life.

They’re ideal for automotive bodywork, HVAC ductwork, metal roofing, panel fabrication, and any sheet-metal task that requires precise left-turn cuts or straight cuts on thin to moderately thick metal.

After use, wipe blades clean and dry to prevent corrosion. Periodically check the pivot bolt for tightness and apply a light lubricant to the pivot to keep motion smooth. Store in a dry place and avoid forcing cuts that exceed the material thickness to prevent blade dulling or misalignment.

Wear safety goggles to protect eyes from metal shards, use gloves to protect hands, clamp or secure the workpiece to prevent slipping, cut away from your body, and take light, controlled passes to avoid bending or kicking back the material.

Projects requiring precise left-hand curves in sheet metal, such as curved duct sections, custom panels, or sections of automotive sheet metal, will benefit most. The 10" length offers good leverage for larger cuts without sacrificing control for curves.

If your work involves left-hand curves, GL93101 is the better choice due to its left-cut geometry. For right-hand curves, GL93102 (Right Cut 10") is the counterpart. If you need a shorter reach or precision on smaller pieces, GL93103 (8" Left Cut) provides similar left-cut capability in a more compact size. See alternatives here: https://fepy.com/products/sata-gl93102-10-right-cut-aviation-tin-snips and https://fepy.com/products/sata-gl93103-8-left-cut-aviation-tin-snips

Yes, given its left-cut capability, 10" length for leverage, double-leverage design for power, durable blades, and ergonomic non-slip handles, it offers strong performance for curved and straight sheet-metal cutting tasks. It’s a solid choice when left-cut capability is needed and durability matters for repeated use.