مجموعة لقم توركس (1/4") من ساتا (Dr.25l) قياس (T20x25mm) مكونة من (5) قطع موديل (SC59234)

The set includes five Torx T20 bits, each 25 mm in length, all compatible with 1/4" drive bit holders. The bits are arranged in a display pack for easy access.

1/4" drive compatibility means these bits are designed to fit standard 1/4" drive ratchets, drivers, and bit holders, allowing you to use them with common hand tools and drivers.

S2 tool steel inserts are known for high strength and wear resistance, providing a secure grip on fasteners. Heat-treating hardens the bits, improving durability and reducing tip wear under demanding use.

They’re well-suited for automotive maintenance, appliance repair, electronics work, bike servicing, and general assembly tasks that involve Torx T20 fasteners.

1) Insert a 1/4" drive bit holder or driver into your tool. 2) Seat a Torx T20 bit fully into the holder. 3) Apply steady, perpendicular pressure while turning to avoid cam-out. 4) Remove the bit when finished and store properly.

They can be used with some impact drivers that accept 1/4" drive bits, but verify your tool’s compatibility and the bit’s impact rating. For high-torque or heavy-duty tasks, use impact-rated bits recommended by the tool manufacturer.

Keep them clean and dry, store them in the display pack or a dedicated bit organizer, avoid dropping them onto hard surfaces, and use the correct size for each fastener to prevent wear or cam-out.

Similar 1/4-inch Torx T20 sets on Fepy share the same drive size and fastener type, but may vary in bit material, finish, and number of pieces. For reference, you can explore these alternatives on Fepy: https://fepy.com/product/sata-sc59235-5-piece-t20-1-4-drive-25mm, https://fepy.com/product/sata-sc59236-5-piece-t20-1-4-drive-25mm-s2, and https://fepy.com/product/sata-sc59340-3-piece-t20-1-4-drive-25mm

Consider durability (S2 steel insert and heat treatment), the five-piece quantity for reducing tool changes, and compatibility with your existing tools. If you’re unsure, compare the per-bit value and check the return options offered by Fepy to ensure you’re comfortable with the purchase.

Look for clear specifications in the product title and tech specs: Torx size (T20), drive type (1/4"), bit length (25 mm). Visuals and the spec section on the product page will confirm these details.

Yes: wear eye protection, use the correct size bit for the fastener to prevent cam-out, ensure the tool is properly seated, apply steady pressure without forcing, and keep hands clear of the bit’s rotating area. Store bits securely to avoid damage or injury.