لقم فك نوع فيليبس متصالب (5/16") من ساتا (Dr.30l) قياس (3x30mm) مكونة من (5) قطع موديل (SC59423)

A 5/16\" drive fits common screwdrivers and power tools with a 5/16\" chuck, while the 30 mm length provides extended reach for deep or recessed fasteners. This combination is ideal for furniture, appliances, and electronics assemblies where space is tight but you still need a reliable bite.

The bits use S2 steel insert construction with heat treatment to maximize strength and wear resistance. An anti-corrosion coating helps protect against rust, keeping the tips sharper and more durable over time.

Insert the bit securely into a 5/16\" drive tool or driver, ensure it sits snug in the screw head, and apply steady torque to prevent cam-out. The longer 30 mm length helps reach tight or deep fasteners while maintaining control and stability.

Ideal for DIY furniture assembly, home appliance repairs, electronics servicing, and general mechanical work where a Phillips #3 bit in a 5/16\" drive is needed.

Yes. The precision Phillips #3 design is paired with a snug fit in fasteners and robust steel construction to minimize slippage and wear during fastening tasks, improving efficiency and reducing damage to screws.

SC59423 is a 5-piece set for 5/16\" drive with 30 mm bits, while SC59424 (for reference) is a 5-piece set for a 1/4\" drive with 25 mm bits. If you need the shorter, lighter setup for 1/4\" tools, you might consider SC59424. Compare here: https://fepy.com/product/sata-sc59424-5-piece-1-4-drive-phillips-3x25mm

SC59425 offers a different configuration (a 6-piece set with 5/16\" drive, including 3 x 32 mm bits). If you’re looking for a slightly longer reach and more bits, SC59425 could be a good option. Compare here: https://fepy.com/product/sata-sc59425-6-piece-5-16-drive-phillips-3x32mm

The 30 mm length provides extended reach but may limit maneuverability in extremely tight spots. Use in combination with a compact driver or a right-angle tool if you’re working in very confined spaces.

Keep them in their display or a dedicated bit case to prevent contact with moisture or corrosive residues. Wipe clean after use, dry thoroughly, and store in a dry environment to maintain the anti-corrosion coating and sharpness.

Yes. The set delivers durable S2 steel insert bits with heat treatment and anti-corrosion finish at a compact, portable 5-piece pack. It’s a cost-effective choice for frequent Phillips #3 fastening tasks across DIY and professional projects.