منشار يدوي بمقبض خشبي من ساتا قياس (550mm) مكون من (7) أسنان في البوصة موديل (ST93624ME)

Key specs: 550 mm blade length, 7 teeth per inch (TPI), high-carbon steel blade, precision-ground, teeth sharpened on both sides, hardened edge around each tooth, and an ergonomic wooden handle designed for a secure grip.

A 550 mm blade enables longer, fewer passes for wide stock and rip cuts, improving efficiency on larger pieces. It’s ideal for straight, long cuts and reduces effort on extended workpieces, though it may be slightly less maneuverable for tight curves than shorter blades.

Yes. With a 7 TPI designation, this blade provides a finer cut than coarser blades, delivering smoother edges on wood when used with proper technique and steady guidance, making it suitable for furniture work and precise carpentry tasks.

Secure the workpiece with clamps, mark the cutting line clearly, and start the cut with light pressure to establish a groove. Maintain a steady, perpendicular angle to the work surface, and let the sharp teeth do the work. Use smooth, even strokes and avoid forcing the blade to prevent wandering.

Keep the blade clean and dry after use, lightly oil the blade to prevent rust, and store it in a protective sheath. When dull, resharpen or replace the blade to maintain clean cuts. Regularly inspect for any signs of chipping or wear.

Wear safety goggles to protect your eyes, use clamps to secure the workpiece, keep fingers away from the cutting area, ensure a firm grip on the wooden handle, and never cut toward your body. Use a blade guard when the saw is not in use.

The 8 TPI variant will have finer teeth for potentially smoother cuts and a slightly finer finish, while the 7 TPI version cuts a bit faster with a more pronounced roughness that can be ideal for quick carpentry tasks. Compare the two here: https://fepy.com/product/sata-st93624me-550mm-wood-handle-hand-saw-8-teeth-in

The 450 mm variant offers greater maneuverability for tight spaces and curves, while the 550 mm version provides longer, straighter cuts with fewer passes. Consider the 450 mm option here: https://fepy.com/product/sata-st93620me-450mm-wood-handle-hand-saw-7-teeth-in

Yes. For broader comparisons with other 550 mm options on Fepy, you can review similar 550 mm saws here: https://fepy.com/product/sata-st93615me-550mm-wood-handle-hand-saw-7-teeth-in

Great for furniture making, trim work, cabinetry, shelving, and general carpentry where long, straight cuts and clean edges are beneficial. It’s well-suited for ripping boards, framing, and other precision woodcutting tasks where the length of the blade improves efficiency.

To minimize tear-out, start with a light scoring cut along the line, use a sharp blade with proper bite, maintain a steady feed rate, and support the wood to prevent vibration. Clamp workpieces securely and use a backer board for delicate faces if needed.