أداة ثني الأنابيب ساتا بزاوية انحناء (180°) ثلاثة في واحد موديل (ST97327)

It supports 6 mm, 8 mm and 10 mm outer diameters, making it suitable for copper, aluminum and soft steel tubes.

The tool allows bends from 0 to 180 degrees and is engineered for accurate bends to help you avoid rework and achieve clean outcomes.

The bending plate is cast from aluminum alloy for rigidity and durability, and the handle features a knurled surface for a comfortable, secure grip.

Choose the appropriate diameter size for your tube (6, 8 or 10 mm) on the tool, clamp the tube securely, align the bend, and perform a controlled bend up to the desired angle. The tool is designed to switch between sizes without removing or swapping parts.

It is well suited for automotive tubing, HVAC piping, plumbing, and general fabrication tasks where 6, 8 or 10 mm tubes are used.

Mark the desired angle, position the tube in the correct size groove, clamp it securely, and gradually apply steady pressure to bend toward the target angle. Check the angle with a protractor or gauge and adjust as needed.

Yes. The tool is designed to bend copper, aluminum and soft steel tubes. Avoid hard or thick wall tubes that require heavier equipment.

Wear eye protection and gloves, keep hands clear of the bending area, secure the tube in the clamp, and work on a stable surface to prevent slips or pinching.

Compared with other 3-in-1 6/8/10 mm tube benders on Fepy, this model offers all three sizes in one unit with a 0 to 180 degree bending range and a durable aluminum bending plate. For similar options you can explore these alternatives on Fepy: 3-in-1 tube bender results at https://fepy.com/search?q=3-in-1+tube+bender and 6 mm tube bend options at https://fepy.com/search?q=6mm+tube+bender and 10 mm tube bend options at https://fepy.com/search?q=10mm+tube+bender.

Yes. Its three sizes in one compact, durable design and its ease of use make it suitable for DIY projects as well as more frequent professional work, delivering reliable results with less setup time.

Wipe it clean after use, store in a dry place, and inspect the bending plate and grip for wear. No lubrication is required for normal operation, but avoid exposing it to corrosive environments to preserve the aluminum plate.