كماشة فلتر الزيت القابلة للتعديل ساتا موديل (ST97426ST)

It accommodates oil filters with a diameter range of 63.5 mm to 116.0 mm.

The adjustable jaw lets you tailor the grip to various filter sizes, while serrated jaws bite into the surface for a secure hold, reducing slippage during removal and installation.

It features a high-strength construction with a corrosion-resistant finish, plus ergonomic, non-slip handles and a slim profile for better control and reduced hand fatigue, especially in tight spaces.

1) Ensure the engine is off and cool. 2) Adjust the jaw to fit your filter (63.5–116 mm). 3) Position the jaws around the filter and clamp firmly with the two handles. 4) Turn counterclockwise with steady pressure to loosen, then remove the filter.

It's suitable for cars, trucks, motorcycles, and other machinery that use standard oil filters within the 63.5–116 mm range.

Compared to other options on Fepy, the SATA ST97426ST offers an adjustable jaw that covers a wide range of filters, two clamp handles for maximum leverage, and a corrosion-resistant finish. For reference, you can explore similar options such as the Dual-Handle Oil Filter Wrench (https://fepy.com/product/dual-handle-oil-filter-wrench-63-116mm) and the Adjustable Serrated Jaw Oil Filter Pliers (https://fepy.com/product/adjustable-oil-filter-wrench-63-115mm) to compare features and fit.

Wear gloves to protect your hands, ensure the engine is off and cool, secure the tool tightly around the filter to prevent slipping, apply steady pressure rather than force, and keep fingers away from moving or hot components.

After use, wipe it down to remove oil and debris, dry completely, and apply a light coat of oil to prevent rust. Store in a dry place to preserve the corrosion-resistant finish.

Yes. The adjustable range reduces the need for multiple tools, while the two-clamp design and durable construction save time and money by increasing efficiency and reducing tool replacements over time.

1 x SATA ST97426ST Adjustable Oil Filter Wrench Pliers and a user manual.

Measure the filter’s outer diameter. If it falls within 63.5 mm to 116.0 mm, it should be compatible. If you’re unsure, compare the measurement to the tool’s stated range or reach out for guidance.