لقمة الفك المزدوجة المصنوعة من الفولاذ السبائكي قياس (65x1/4")

If you need alternatives, see related options on Fepy such as the Alloy Steel 1/4 x 75mm (https://fepy.com/product/screw-bit-alloy-steel-1-4-x-75mm) and the Stainless Steel 1/4 x 65mm (https://fepy.com/product/screw-bit-stainless-steel-1-4-x-65mm) to compare lengths and materials.

Ensure your drill/driver accepts 1/4\" hex bits and that the bit’s length and hardness suit your project. Avoid using mismatched or damaged bits, and respect your tool’s torque limits.

It’s built for standard 1/4\" hex drive drivers and is suitable for common screw types used in DIY and professional work. Check the screw head type you’re using to ensure it matches your bit’s tip profile.

The alloy steel composition, two-layer grip design, self-lock mechanism, and corrosion-resistant coating deliver better torque transfer, reduced wear, and longer life, leading to better long-term value.

Wipe clean after use, keep dry, and store in a protective case to prevent moisture exposure. If you notice rust or wear, replace promptly to maintain performance.

The bit is designed for robust use and includes anti-slip and corrosion-resistant features. Use within your tool's torque rating and avoid using damaged bits or in extreme conditions beyond spec. Wear eye protection and handle with care.

1) Insert the bit into a compatible 1/4\" hex chuck; 2) Tighten the chuck firmly but avoid overtightening; 3) Use steady pressure and appropriate speed; 4) Start with a light pass to seat the screw, then apply full torque as needed; 5) Remove by reversing the tool.

It's suitable for a wide range of fastening tasks in wood, metal, and DIY projects. The 65mm length provides decent reach, while the 1/4\" hex drive works with most standard drivers and power drills.

For longer reach, you might consider the Screw Bit Alloy Steel 1/4 x 75mm (https://fepy.com/product/screw-bit-alloy-steel-1-4-x-75mm). For enhanced corrosion resistance in harsher environments, see the Screw Bit Stainless Steel 1/4 x 65mm (https://fepy.com/product/screw-bit-stainless-steel-1-4-x-65mm).

Diameter: 1/4\"; Length: 65mm; Material: alloy steel; Features: anti-slip coating, anti-rust coating, two-layer grip structure with a self-lock mechanism, high hardness, corrosion-resistant coating.

This is a high-strength alloy steel screw bit designed to fit standard 1/4\" hex drive tools. At 65mm long, it provides reach for fastening screws in tight spaces, and its anti-slip and anti-rust coatings help maintain grip and longevity during professional and DIY work.

If you need alternatives, see related options on Fepy such as the Alloy Steel 1/4 x 75mm (https://fepy.com/product/screw-bit-alloy-steel-1-4-x-75mm) and the Stainless Steel 1/4 x 65mm (https://fepy.com/product/screw-bit-stainless-steel-1-4-x-65mm) to compare lengths and materials.

Ensure your drill/driver accepts 1/4\" hex bits and that the bit’s length and hardness suit your project. Avoid using mismatched or damaged bits, and respect your tool’s torque limits.

It’s built for standard 1/4\" hex drive drivers and is suitable for common screw types used in DIY and professional work. Check the screw head type you’re using to ensure it matches your bit’s tip profile.