غراء بلاط (Weber) من (Sodamco) باللون الرمادي وزن (20Kg)

This adhesive offers excellent bonding strength, water resistance, and a low VOC content. It also has anti-slip properties and is compatible with a wide range of ceramic tiles and granites.

The recommended thickness for applying Webercol Fix is between 2 to 10 mm, depending on the tile size and substrate conditions.

The initial setting time is approximately 15 minutes, with a full curing time of 24 hours before grouting. It can withstand light foot traffic after 24 to 48 hours.

A 20 kg bag of Webercol Fix typically covers an area of about 3 to 7 m², depending on the substrate and the thickness of the application.

No, it is not suitable for use on gypsum walls, wooden floors, or existing ceramic tiles. It is best applied on clean, solid surfaces like concrete and cementitious plasters.

The pot life of Webercol Fix is approximately 4 hours when stored in the shade, allowing ample time for application before it begins to set.

For a 20 kg bag, mix 4 to 4.8 litres of clean water until a uniform, lump-free paste is achieved. It is recommended to use an electric mixer with a low rotation speed for the best results.

Webercol Fix is a cement-based tile adhesive composed of cement, siliceous sand, and additives. It is available in grey or white colour. This composition provides a strong bonding effect suitable for various tile types.

Webercol Fix can be applied directly onto concrete, stone walls (cleaned and prepared), and cementitious plaster and renders. However, it is not advisable for gypsum substrates. It is suitable for internal applications such as bathrooms, kitchens, and stairs.

To prepare Webercol Fix, mix 4 to 4.8 litres of clean cool water with a 20 kg bag. Use an electric mixer at low speed (< 300 rpm) to achieve a uniform paste. Let the mixture rest for a few minutes before application.

Webercol Fix has an open time of 15 minutes at standard conditions and a pot life of 2 hours. Its density is approximately 1.55 kg/lit. ± 0.05. The initial set time is 570 minutes, and the final set time is 750 minutes.

Apply Webercol Fix evenly on the substrate using a notched trowel to achieve a uniform thickness. Press tiles firmly onto the adhesive, ensuring they do not slip from the tile sides. The minimum thickness should be 2 to 3 mm.

While primarily designed for internal use, some sources suggest that Webercol Fix can be used externally due to its water-resistant properties. However, it is crucial to ensure the substrate is properly prepared and protected from extreme weather conditions.

For exceptional performance, you can mix Webercol Fix with a bonding agent like Weberad 225 MB. For a 20 kg bag, use 1 litre of Weberad 225 MB plus 3 litres of clean water.